FS: DuraTrax Street Force GP w/Velocity .15 Engine Gas Powered R/C Car
#1
FS: DuraTrax Street Force GP w/Velocity .15 Engine Gas Powered R/C Car
I am selling a DuraTrax Street Force GP w/Velocity .15 Engine Gas Powered R/C Car. I bought this new for $249.99 + got the upgraded parts. Plans for this car were to supply the couple of small parts that need to be replaced on the front suspension and install a Camaro SS Body with SS Wheels which would make this thing look really nice. The body the kit comes with isnt very attractive but its still a body. The Camaro body only cost about $20.00 and the bigger and wider wheels arent too expensive. Just looking to get money to buy the spacers im needing. This thing runs great and starts fine, will come with starter and charger along with controler and gas that I have and fuel fill bottle. Aside from the suspension parts that need to be replaced It is a great car and is for beginner to advanced users. Its 4wd and will run up to 60mph and has multiple gears. I dont really wanna sell but my loss is your gain. Only $25.00 is what it will cost to replace the small parts that are easy to swap with a screw driver. Does come with body. Im selling so I can buy some spacers for my car.
$105 Firm Will Ship! Comes in original box.
You can find the parts here:
http://www3.towerhobbies.com/cgi-bin...=DTXC0050&P=OW
PARTS NEEDED
Front Bulkheads $6.29
Front Wheel Hub $2.69
Chassis $15.99
PARTS (NEW) I BOUGHT
Front Bumper $3.59
Front Strut Tower $3.59
Specs:
Vehicle Type: On-Road
Power Type: Nitro (0-.15)
Body Type: Touring Coupe
Scale: 1/10
Build Type: Pre-Built
Drive Type: 4 WD
Shocks: Oil-Filled
Motor: .15 Velocity Engine
Driver Skill: Beginner
Applications:
- Pavement
- Smooth Track
- Touring Car
Dimensional Specs:
Wheelbase: 10.24 inches (260 mm)
Weight: 3.15 Lbs. (1429 g)
Chassis Length: 13.78 inches (350 mm)
Chassis Width: 7.48 inches (190 mm)
Chassis Height: 4.72 inches (120 mm)
Body Length: 16.85 inches (428 mm)
Body Width: 7.48 inches (190 mm)
Body Height: 4.72 inches (120 mm)
Ground Clearance: .43 inches (11 mm)
SS Camaro Body:
http://www3.towerhobbies.com/cgi-bin...?&I=LXADW3&P=7
Pictures:
$105 Firm Will Ship! Comes in original box.
You can find the parts here:
http://www3.towerhobbies.com/cgi-bin...=DTXC0050&P=OW
PARTS NEEDED
Front Bulkheads $6.29
Front Wheel Hub $2.69
Chassis $15.99
PARTS (NEW) I BOUGHT
Front Bumper $3.59
Front Strut Tower $3.59
Specs:
Vehicle Type: On-Road
Power Type: Nitro (0-.15)
Body Type: Touring Coupe
Scale: 1/10
Build Type: Pre-Built
Drive Type: 4 WD
Shocks: Oil-Filled
Motor: .15 Velocity Engine
Driver Skill: Beginner
Applications:
- Pavement
- Smooth Track
- Touring Car
Dimensional Specs:
Wheelbase: 10.24 inches (260 mm)
Weight: 3.15 Lbs. (1429 g)
Chassis Length: 13.78 inches (350 mm)
Chassis Width: 7.48 inches (190 mm)
Chassis Height: 4.72 inches (120 mm)
Body Length: 16.85 inches (428 mm)
Body Width: 7.48 inches (190 mm)
Body Height: 4.72 inches (120 mm)
Ground Clearance: .43 inches (11 mm)
SS Camaro Body:
http://www3.towerhobbies.com/cgi-bin...?&I=LXADW3&P=7
Pictures:
Last edited by Mike96z; 11-26-2007 at 07:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post