Will SB2.2 Heads woirk on L98 block?
Thread Starter
Registered User
Joined: Dec 2001
Posts: 355
From: clinton twp. MI, USA
Will SB2.2 Heads work on L98 block?
Will the Nascar SB2.2 heads work on a L98 350 engine? If so, are they bolt on? Just add big cam and correct intake?
Thanks
Thanks
Last edited by BLUETOPTA; May 17, 2007 at 07:07 AM.
Registered User
Joined: May 1999
Posts: 521
From: Reading, Pa
The short answer is yes. However, it takes custom pistons, headers and a whole lot more than just being able to bolt them on to make the motor work.
Do a search and you should find some posts about my motor.
Do a search and you should find some posts about my motor.
Registered User
Joined: Oct 2005
Posts: 685
From: Bakersfield
Registered User
Joined: May 1999
Posts: 521
From: Reading, Pa
The ports are totally different than a standard head requiring a special intake manifold, pistons and headers. The cumbustion chambers are also generally in the 43-48cc range so compression will be high unless you get the pistons dished. take a look at this pic of our motor and specifically at the intake runners:
Moderator
Joined: Dec 1969
Posts: 10,745
From: Buffalo, New York
The ports are totally different than a standard head requiring a special intake manifold, pistons and headers. The cumbustion chambers are also generally in the 43-48cc range so compression will be high unless you get the pistons dished. take a look at this pic of our motor and specifically at the intake runners:
Rich
Thread
Thread Starter
Forum
Replies
Last Post