ok so i was changing my crank n got 2 of the 3 screws out..the 3rd one stripped..how do i get this bolt out i need out with this one..

 

Channel locks

hammer on a smaller socket

die grind the edge of the bolt

Drill off the head, and use a strong plier to unscrew the 'stud' (if the bolt isn't counter sunk)...mabe even a reverse thread kit.

P.S. Let me be the first to say, this thread is getting moved faster than a
top fuel dragster at full throttle

 

Drag it over to SLP. IThey're in your neighborhood, right?

Zero is correct. Try the specific forum for your engine. You'll probably get more responses there.

 

i think you have much more to worry abotu if your crank is held in by screws

 

I don't see that much from you in this forum. I better enjoy the glory while it lasts.