69 Hurst Super/Stock AMX build up
69 Hurst Super/Stock AMX build up
1969 S/S AMX DRIVE LINE BUILD:
ENGINE:
390AMC bord .040 over, 9.2:1 c/r, Dual procharger’s with crossram intake, Indy racing head's, 307*Dur.675Lift cam, 2-900Cfm 4bbl Holley TBI's.
EXHAUST:
1-3/4," 1-7/8” headers
Side pipes.
TRANSMISSION:
Stage3 clutch, close ratio 4spd.
DIFF/RATIO:
AMC20 rear-end 4.44:1 gear's.
TIRES/WHEELS:
28X12R15's in the rear.28"tall. TORQUE THRUST D'S 15X8.5.
245/50R15's in the front.25.5"tall. TORQUE THRUST D'S 15X8.5.
ESTIMATED E/T:
9.20’s - 9.40’s.
with the 9.2:1 and dual procharger's what psi boost should i
have to be about a 14.2-14.6:1 compression ratio??
ENGINE:
390AMC bord .040 over, 9.2:1 c/r, Dual procharger’s with crossram intake, Indy racing head's, 307*Dur.675Lift cam, 2-900Cfm 4bbl Holley TBI's.
EXHAUST:
1-3/4," 1-7/8” headers
Side pipes.
TRANSMISSION:
Stage3 clutch, close ratio 4spd.
DIFF/RATIO:
AMC20 rear-end 4.44:1 gear's.
TIRES/WHEELS:
28X12R15's in the rear.28"tall. TORQUE THRUST D'S 15X8.5.
245/50R15's in the front.25.5"tall. TORQUE THRUST D'S 15X8.5.
ESTIMATED E/T:
9.20’s - 9.40’s.
with the 9.2:1 and dual procharger's what psi boost should i
have to be about a 14.2-14.6:1 compression ratio??
Last edited by 91 GTA Ramair2; Dec 29, 2003 at 06:22 PM.
Thread
Thread Starter
Forum
Replies
Last Post
CARiD
Supporting Vendor Group Purchases and Sales
0
Sep 30, 2015 05:44 AM
CARiD
Supporting Vendor Group Purchases and Sales
0
Sep 7, 2015 08:21 AM



