Valve cover gaskets
Thread Starter
Registered User
Joined: Nov 2001
Posts: 9
From: Hard hittin' New Britian, CT
Valve cover gaskets
This might seem like a silly question. But can I use perimeter bolt valve cover gaskets with centerbolt valve covers? It looks like it would seal fine but I want to make sure.
Registered User
Joined: Mar 2001
Posts: 373
From: Anywhere but here
Well, to be safe I would just run the ones that you're supposed too. The guys at checker told me it does make a difference, but they don't always know what they're talking about 
------------------
1986 Z28
383 ci Stroker, Dart Sportsmen 2 heads, roller rocker arms, Crower Hot Street Beast cam, edelbrock 750cfm carb and performer rpm intake, Corvette Servos, shift kit and 2600 rpm stall convertor, 3.73 gears and Eaton limited slip posi rearend.
First and only 1/4 times:
14.344 at 95mph with a 2.1 60 foot.
Altitude corrected:
13.5 at 100mph
Some practice and some street slicks should see me in the 13's, 12's corrected
------------------
1986 Z28
383 ci Stroker, Dart Sportsmen 2 heads, roller rocker arms, Crower Hot Street Beast cam, edelbrock 750cfm carb and performer rpm intake, Corvette Servos, shift kit and 2600 rpm stall convertor, 3.73 gears and Eaton limited slip posi rearend.
First and only 1/4 times:
14.344 at 95mph with a 2.1 60 foot.
Altitude corrected:
13.5 at 100mph
Some practice and some street slicks should see me in the 13's, 12's corrected
Thread
Thread Starter
Forum
Replies
Last Post