I have a 700R4. After i rebuilt the engine ( i pulled the engine and tranny at the same time) I reconnected it all together and dropped everything back in. The only thing i touched of the tranny was i added a corvette servo. Anyway, now the tranny cant go into 1, 2, itll get into D, and will miss everything else (P, OD and N)...is there an adjustament for the cable on the shifter?...b/c ill move the shifter and watch it underneathe the car..and it wont move the lever on the tranny..

 

either the cable is messed up or when you put it back on the lever wasnt in the park position which i remember correct is all the way forward(towards the engine)