i have a 90 iroc with a 305tpi. i changed the gears from 2.73 to 3.42. it shuts down at 3000rpm. that is 95mph. or that would be 118mph if i had 2.73. how can i bypass the governer so i can go faster. it pulls hard to 3000 and then stops and starts to surge like i hit a speed limiter.

 

get a aftermarket chip or a custom burned one. the limiter is in the computer,no way to bypass it.

 

Speed limiters suck.

 

yeah... on my 1990 iroc-z with 3.23's, my car would pause at 110 mph... sucked ***, but i had a guy burn me a new prom for me and i had him take out the speed limiter. and anyways, with a 305 tpi, i dont think you'd want to race anyone top end...

 

Thirdgen.org has an article on how to bypass it. If you try it, let me know how it works. Good Luck!
http://www.thirdgen.org/newdesign/tech/unlimited.shtml