Side moulding on my 79
12-25-2002, 08:12 PM
#1
Registered User
Thread Starter
Join Date: Dec 2002
Location: Toronto, Ontario
Posts: 29
Side moulding on my 79
Ok well here's the pic
http://www.angelfire.com/retro/mechanix/mycamaro.jpg
and well i already removed the camaro badging off the side since they were coming off anyway and i was wondering if that black moulding along the side of the car was just glued or is there screws or holes because i want it removed just dont want to paint the car now.
Any advise will be very greatly appreciated.
http://www.angelfire.com/retro/mechanix/mycamaro.jpg
and well i already removed the camaro badging off the side since they were coming off anyway and i was wondering if that black moulding along the side of the car was just glued or is there screws or holes because i want it removed just dont want to paint the car now.
Any advise will be very greatly appreciated.
Last edited by T.O_Camaro; 12-25-2002 at 08:15 PM.
12-28-2002, 04:00 PM
#4
Registered User
Thread Starter
Join Date: Dec 2002
Location: Toronto, Ontario
Posts: 29
It's alright I just said to hell with it and tried anyways, they were just two sided taped on and came off very easily with little clean up to do, might i add removing the camaro badge from the lower front fenders and that side moulding makes a big difference in the look and agressive look of this style vehicle. If I take any pictures i will post them up for your input on my decision and maybe will help others thinking about doing the same.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
07-10-2015 02:23 PM