what plug wires do you guys recomend using with SLP headers? my buddy already burnt up several Taylor wires. Also what are you guys using for wire looms?

[This message has been edited by Max 93 (edited June 12, 2002).]

 

Use a good set of 8mm wires with 90 deg boots
and you should not have a problem.

 

i have slp headers,and taylor wires.i bought the universal kit and it had 90 degree bent boots.i also used the wire looms that bolt onto the center bolts for the valve covers.they work perfect
hope this helps

 

thanks guys

 

what wire looms are you using? he bought some awhile back but they didn't fit.

 

I've got Edelbrock shorty headers and I've been using MSD Super Conductors (8.5mm & 90 degree boots) w/ the Taylor boots
I burned up a set of Accel 8mm wires in less than a week before I put these on. They have been going great and they don't show any signs of being burnt at all

------------------
Jay
black 85 Z28 - waiting on a new paint job, then she'll be real purty
87 Chevy S10 Blazer- 2.8 liters of pure fury

Jay's Website
yahoo im: wildcat856
AIM: Jayman85Z
Homer no function beer well without
check out GMPerformance.org

 

i'm at work right now and don't have the summit catalog here,i'll post later and let you know the brand.they are the plastic ones that bolt right into each center bolt for the valve covers.then you just angle the plug boot the way you want it ,and tighten em up.mine haven't moved since.they are like 45 bucks ,but they do work well and look good.
hope this helps