anyone know of any 4.185 sbc pistons for a 3.875 stroke crank with 6.0 rods? preferably forged in the 12.5:1 range. any and all help is appreciated.

------------------
1984 project bird 2.5/ 5spd, soon to be 400+cu in smallblock/th350

 

This questions is more suited for 3rd Gen Tech, I will move it there for you. Please checkout the link in my sig also for more details on the adv tech forum.

Thanks.

------------------
Ken Mook - 97' SS #2544
Advanced Tech Posting Guidelines

• Almost Alive: ?rwhp & ?rwtq Naturally Aspirated on the Stock Bottom End.
• Stage 3 Pro Performance Heads, Solid Roller 242/248 Cam, Endur-X Lifters,
• Jet Hot Hooker LTs, True Dual 3" Exhaust with x-pipe, and the list goes on and on...

 

Sounds kinda like what I'm doing but I'm just going 30 over on my 400 block. There are a few places to get this stuff, The best and the best priced was www.theengineshop.com

and the second is Lukovich Performance
Call 1-248-280-0240 Ask for John and he should be able to get you what ever you need.

Kevin



------------------
86 Chevrolet Camaro Iroc Z-28 Fully Loaded With T-Tops
Mods;
Spohn SubFrame Connectors, S&W Race Car Chassis 8 point Roll Cage, 1997 SS Aniversary 3.42 POSI Rear End with 12" Rotors and 4 Piston PBR Calipers, Balanced Drive shaft... Others soon to come...

Best times before any mods done, Complety Stock;15.6 @ 87mph
Waiting for the tracks to open again to see what I got going on Now!

ntimad8.cz28.com