Pic of my IROC
Registered User
Joined: Jul 2003
Posts: 1,025
From: usa
Just an FYI, the reason the paint came off like skin was because of poor prep work and sanding, there's no adhession. Flex is only added to help install rubber bumer's after they've painted do to the flexing of the bumper when installing. The flex invaporates from the paint over a very short period of time. If you want the job 100% correct, the bumper needs to be stripped down to bare rubber first. Or buy a new GM bumper and go from there. Trust me I know what I'm talking about..
Thread Starter
Registered User
Joined: May 2007
Posts: 14
Thread Starter
Registered User
Joined: May 2007
Posts: 14
Bumper
Just an FYI, the reason the paint came off like skin was because of poor prep work and sanding, there's no adhession. Flex is only added to help install rubber bumer's after they've painted do to the flexing of the bumper when installing. The flex invaporates from the paint over a very short period of time. If you want the job 100% correct, the bumper needs to be stripped down to bare rubber first. Or buy a new GM bumper and go from there. Trust me I know what I'm talking about..
Registered User
Joined: Aug 2000
Posts: 205
From: Central Mass
Thread
Thread Starter
Forum
Replies
Last Post
mark0006
General 1967-2002 F-Body Tech
0
Feb 28, 2015 07:12 PM