can you buy a s/r with out the computer and harness and just the throttle body,and upper and lower intake and injectors.
if so where?

 

Not that I have seen. You can buy the large runners and big mouth intake from TPIS. Its not as good as the miniram but its good for 32 RWHP, then port the stock plenum. You can get both for 850-900 bucks and they are direct swaps.

 

Yes you can buy just the intake....GM High Tech gave the part number, and if you call around I'm sure you will find that anyone that sells holley parts can order it for you....GMHTP got their's from Summit

 

i got a 383 with the stock tpi on it right now(cash flow).
and stock injectors. i have been looking into both systems.
and i dont need the harness so i was just wondering.

 

Ya but summit wants 2 grand for it, thats f-n nuts!

 

NONONONONONONONO.....Summit has the intake with computer, harness and all for 2 grand.....They don't have just the intake advertised, but if you call you can get a price for just the intake, and that's what part number GMHTP had in the article....It's like $400

 

ordered mine from thunder racing it was within a few dollars of summit. a little over $500

 

The car in the article picked up 4 tenths in the 1/4. From experience in the 15-low 13 sec 1/4 every tenth improvement is worth 10 HP so that is an estimated 40 HP gain. The TPIS is 95 HP at the rear wheels dynoed. I really couldn't justify anything but the miniram with those numbers. Granted I want every HP cost be damned thats just my personality. If I'm spending cash I want the best, otherwise I am gonna be pissed I didn't when I lose that 1st race.

 

Does the strealth ram look familiar to anyone else? All Holley did was use a old design tunnel ram intake, took off the carb plenium (aka tunnel) and replaced it w/ a dry plenium, and added some bungs for the injectors. So basically it is an oldschool carburated intake designed back in the 60's or early 70's that they put the mechanicals on to make it FI.

 

I agree whole heartedly. Why buy middle of the line parts if you know youre going to end up buying the better ones at some point along the ways. Wait the extra bit of time, save your money and that way you dont end up wasting your money

 

True, but if you have a decently modded motor and no need to do all out the SR should be a nice alternative....it's like middle ground for those of us who can't afford a thousand dollar intake system, but already have some other mods done

 

Hey guys, might stray a little from the topic, but has anyone tried Street Ram??? I was looking at it and thought it would be a great upgrade for the stock system.... Just lookin for some info....

Will