Hooker Headers Full Length..
Registered User
Joined: Dec 1998
Posts: 2,161
From: Haslett, Michigan
Re: Hooker Headers Full Length..
Angle plug heads will work best, as Denny alludes with his terse reply. I've got AFR95 angle plug heads and the plugs clear. You may need a heat sleeve on #1 and 7 cylinder, IIRC.
Registered User
Joined: Dec 1999
Posts: 2,022
From: MD
Re: Hooker Headers Full Length..
L98 angle plugs have excellent clearance.
Standard angle plugs will clear, but come close to the wire boots on several primaries and require heat sleeves like stated above.
Straight plugs also come close on several cylinders, but #7 will interfere. Denting of the primary, a short plug, and a heat sleeve are usually needed.
Standard angle plugs will clear, but come close to the wire boots on several primaries and require heat sleeves like stated above.
Straight plugs also come close on several cylinders, but #7 will interfere. Denting of the primary, a short plug, and a heat sleeve are usually needed.
Thread
Thread Starter
Forum
Replies
Last Post
