Dyno Run
#1
Dyno Run
Welp.. the hp was way lower than expected.. but the tq was way higher.. the a/f was jut crap though.. 11.5 and gradually lowering and at about 4200rpm is hits 11.0 and below 10.0 before 4800rpm..
I will have the actual graph and some pics of the car on the dyno tomorrow.
dynorun.001 Max POWER= 249.9 Max TORQUE= 368.6
dynorun.002 Max POWER= 252.9 Max TORQUE= 376.4
air pressure in tires adjusted between runs.. the right rear tire was at like 24.. so put it back at 35..
ENGINE AND MODS RUNDOWN
I will have the actual graph and some pics of the car on the dyno tomorrow.
dynorun.001 Max POWER= 249.9 Max TORQUE= 368.6
dynorun.002 Max POWER= 252.9 Max TORQUE= 376.4
air pressure in tires adjusted between runs.. the right rear tire was at like 24.. so put it back at 35..
ENGINE AND MODS RUNDOWN
Last edited by Shaun 90 Iroc; 09-18-2003 at 03:56 PM.
#3
Originally posted by BigCasino87GTA
what mods do you have?
what mods do you have?
#4
Registered User
Join Date: Apr 2003
Location: Chillin' with Frank, Dino, Sammy and Pete at the Sands!
Posts: 65
damn, that's a nice set up - I'm surprised you still have the stock intake runners on there though, with everything you have now, they might be a little restrictive.
P.S. - nice page, I spent about 2 minutes just dragging the mouse watching the date letters/numbers fly around.
P.S. - nice page, I spent about 2 minutes just dragging the mouse watching the date letters/numbers fly around.
#5
Originally posted by BigCasino87GTA
damn, that's a nice set up - I'm surprised you still have the stock intake runners on there though, with everything you have now, they might be a little restrictive.
P.S. - nice page, I spent about 2 minutes just dragging the mouse watching the date letters/numbers fly around.
damn, that's a nice set up - I'm surprised you still have the stock intake runners on there though, with everything you have now, they might be a little restrictive.
P.S. - nice page, I spent about 2 minutes just dragging the mouse watching the date letters/numbers fly around.
Thread
Thread Starter
Forum
Replies
Last Post