383/6 speed questions?
Thread Starter
Registered User
Joined: May 2002
Posts: 369
From: Kelowna,BC,Canada
383/6 speed questions?
last year i built a 383 for my iroc and now am going to put a 6 speed in it.Will i have to balance the flywheel and will the flywheel off of an LT1 bolt on.
i had to balance the flexplate last year when i built the 383
i had to balance the flexplate last year when i built the 383
Registered User
Joined: Apr 2000
Posts: 1,677
From: T-town
If it's a late-model (1-piece RMS) engine then the LT1 flywheel will bolt up. If it's a 2-piece block you'll need a conversion flywheel.
Since you had to balance the flexplate, you must have an external-balance crank which means you'll need to balance the flywheel too. You can just take the flexplate off and carry them both to a machine shop and have the flywheel balanced to match the flexplate.
Since you had to balance the flexplate, you must have an external-balance crank which means you'll need to balance the flywheel too. You can just take the flexplate off and carry them both to a machine shop and have the flywheel balanced to match the flexplate.
Thread
Thread Starter
Forum
Replies
Last Post
ChrisFrez
CamaroZ28.Com Podcast
0
Nov 30, 2014 08:41 AM
