I havent followed the development that much of the new camaro, but what kind of rear will be in it?

 

4.5 link independant

https://www.camaroz28.com/gallery/ma...?g2_itemId=936

 

Have we heard anything on gearing?

 

3.27 for everything but the manual SS which will be 3.45 in the rear end. If you go to chevy.com/camaro there's a specifications PDF if you want to see each of the ratios for the transmissions.

 

Ok thanks!

 

I ordered an SS today with an auto trans and the paperwork lists the axle ratio as 3.45, so I'm assuming that all the SS's have the same ratio.

 

I haven't seen anything to indicate different.

 

http://www.chevrolet.com/camaro/pdf/...ifications.pdf

The spec says on page 3:
Hydramatic 6L80E speed automatic(SS) w/Tapshift
....
Final Drive Ratio: 3.27

 

Does anyone know the ring gear diameter on these?

 

Correct!
My fault, I was looking at standard equipment on my paperwork. In the options section under the auto trans it lists the ratio as 3:27.

Sorry guys.

 

Question: Who will be supplying the axle? ZF, Saginaw, Dana. Any schematics?

 

hmmm kind of a low gearing what do u guys think bout 4.10 gears

 

8.8"

 

Does anyone make different ratios for this rear end. From what I remember reading the 3.45 and tall tires provide for 54mph in first gear, I would guess that a change in gear ratio would give a dramatic increase 0-60 and 1/4 ets.
????

 

no aftermarket gears are made for this diff yet