When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have p2138 on my 2011 3.6 camaro, took it to repair shop they changed throttle body and pedal , picked car up made it 30 miles it went to limp mode with same code, returned to shop and they said sorry we thought that was it and sent me know my way, I have checked the wiring from the throttle body to ecm and had to fix a bare wire still have the issue, I even put the original pedal back in and still the issue. I can find Noone to point me in the right place. Backstory on car 2011 3.6 new crate engine less than 12,000 miles om it. Car ran great till yesterday, I changed the oil parked car and went to start it and right to limp mode, I double checked everything I did on the oil change and didn't touch any wires or anything. I also pulled a abs module fuse and replaced it because the plastic cover on the fuse was bad. Other than that I've done nothing
Just a heads up - not a lot of members left on this site, mostly 4th Gen owners. Might take a while to get a response on a 2011 V6, if anyone responds at all. Sad to have to say that.
It's the site's fault. The original owners never updated to target folks beyond the 4th Gen. A few of us tried to get the site realigned for the 5th Gen, but it was too late. The site actually just lost relevance with the advent of the LS1 engine. There were other LS1 sites that seemed to attract the CamaroZ28 members. Some issues with moderation of the Lounge caused a lot of members to leave.
Let me ask YOU a question first - why do all you folks from India, with fake western names, and the same Bharti AirTel (India) address keep trying to post your spam and embedded links? The posts get deleted in a matter of hours. You're wasting my time and yours.
