Drivetrain Clutch, Torque Converter, Transmission, Driveline, Axles, Rear Ends

Anyone heard from Frank at CPT?

Thread Tools
 
Search this Thread
 
Old Jul 26, 2008 | 07:28 PM
  #1  
MTBeni's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 293
From: Goldsboro, NC
Anyone heard from Frank at CPT?

Although not a specific driveline question, has anyone been able to get ahold of Frank at CPT? I've had no luck.
Old Jul 27, 2008 | 11:32 AM
  #2  
ghost97ta's Avatar
Registered User
 
Joined: May 2008
Posts: 57
From: lamar mo
frank at cpt

i talked to him about a week ago .and he was pretty busy but i am hopeing to get my trans soon.
Old Jul 27, 2008 | 06:31 PM
  #3  
MTBeni's Avatar
Thread Starter
Registered User
 
Joined: Jun 2005
Posts: 293
From: Goldsboro, NC
Good luck with that. At least now I know he's not dead or hurt. My quest shall continue...
Old Jul 27, 2008 | 09:09 PM
  #4  
pyro719's Avatar
Registered User
 
Joined: Mar 2007
Posts: 502
From: colorado springs
I second the good luck with that!
Old Aug 2, 2008 | 02:55 AM
  #5  
pyro719's Avatar
Registered User
 
Joined: Mar 2007
Posts: 502
From: colorado springs
Even though it took awhile to get my tranny back from CPT, I can say it was worth the wait This tranny kicks like a rented mule! even at 1/8 throttle. Very Happy with the way this thing shifts just hope it lasts a while? My last 2 rebuilds were from a local builer and only llasted 2,000 miles each. So thanks Frank for building me a bad *** tranny
Old Aug 3, 2008 | 07:47 AM
  #6  
RichS's Avatar
Registered User
 
Joined: May 2007
Posts: 6
I talked to him 2 weeks ago, now once again no contact. It's really frustrating contacting him.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
autoxr166
General 1967-2002 F-Body Tech
0
Sep 25, 2015 04:21 PM
colts0455
LT1 Based Engine Tech
5
Sep 22, 2015 02:03 PM
karpetcm
LT1 Based Engine Tech
7
Sep 15, 2015 11:07 AM
colts0455
LT1 Based Engine Tech
47
Sep 4, 2015 01:41 PM
Xiantyl
LT1 Based Engine Tech
18
Jul 21, 2015 05:42 AM




All times are GMT -5. The time now is 03:13 PM.