Guys,
I have a 1997 30th anniversary Camaro SS convertible project car for sale. Its been sitting for 2 years and I still can't find time to finish it... and to top it off im getting married and trying to buy a house. So... it's gotta go. I'll try and get some pics in the next few days...
Here's the specs:

Engine:
355 LT4 w/ATI P1SC (0 miles on it)
- LT4 Heads
- ARP Head Studs
- LT4 Intake
- LT4 Timing set
- Milodon splayed 4 bolt main
- ARP Main Studs
- Forged GM performance Crank
- Eagle Forged ESP Rods
- Wiseco Custom Forged Pistons (8 to 1 Compression Ratio)
- GM Performance 846 cam
- Comp Cams Hi-Tech one-piece Chromemoly Pushrods
- Crane Lifters
- ATI Super Damper
- Canton Oil Pan
- Aeromotive Fuel Pressure Regulator
- MSD Blaster Coil
- ATI Procharger P1SC w/ twin Intercoolers
- Racetronix Fuel pump
- 52lb injectors
- GM Opti
- JET hot Long tube coated headers
- True Duels all the way back out the rear

Drive Line:
- New T56 6 Speed
- Mcleod Twin Disc Clutch
- 4:10 Rear
- Aluminum Drive Shaft

Chassis:
- Corvette C5 Front Brakes
- New wheel bearings
- New front and rear shocks
- H & R Lowering Springs
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- New Ball Joints
- Energy Suspension Full Suspension Bushing set

Body:
- Wolf 6 point roll bar w/ swing-outs
- SLP SS Hood, Spoiler
- Convertible
- White w/ white Leather
- Hugger Orange SS Stripes
- White 2000 SS wheels
- 52k miles on it

Asking: $9000 / OBO

I know I could part it out for more... But I just don't have the time or place to do it. Someone can finish it and have on Bad @ss car or part it out and make a few bucks...

If interested Please call me at (248) 494-3305 or email me at jayviphone@yahoo.com

Thanks,
Jay

 

- vacuum system
- engine wiring needs a final check
- clean the grounds
- new spark plug wires
- dyno tune
I think that would be pretty much it

 

I know you don't want to part it out, but are you willing to sell the SC system? Just checkin.

The car sounds like a good deal for someone.

Dan

 

Dan,
I would part the SC if I have someone lined up to buy the rest of the car for $7000... Let me know if you know anyone who might be interested in the rest of the car and maybe we could work something out.

Thanks,
Jay

 

What kind of hp do you think it'd make?

 

with a good tune it should easly be north of 550 hp

 

Pics Added and NEW Lower Price! $9000/obo

 

if i wasnt buying a house also and having a kid id be all over this! its the car i was looking for when i bought my plain 97 camaro SS vert white on white

*edit* im going to put my SS out there and try and sell it to buy this one

 

I would buy the hood

 

I helped build this car and it is very clean, Jay has owned it practically since it was new. He is one of my best friends and I will vouch for the car. It does, however, have a 3.73 rear that was supposed to go in my car but this peckerhead took it back after I spent the time wire wheeling it and coating it with POR-15 I have a bunch of pictures from when we built this thing, pics of the engine on the stand, the car completely stripped down, etc.

 

I would be interested in this stuff if u part it. I am local too.
- BMR Tubular Control Arms
- BMR Panhard Rod Relocation Kit
- BMR Adjustable Panhard Rod
- Spohn Tubular Adjustable Torque Arm
- Hood
- Wheels
- wolf roll bar
- True duals

JD

 

Sorry dood, I got dibs on all of the suspension if its parted out

 

Ugh, very sharp looking car. I wish I wasn't buried under my current Camaro projects, because if I was looking, I'd love to have this one.

 

no **** if it wasn't a convertible I'd consider selling mine for it.

 

The convertible part doesn't bother me one bit. It's a damn good looking car.