|
07-14-2002, 02:36 PM
|
#1
|
|
Registered User
Join Date: Oct 1998
Location: Engelhard, N.C.
Posts: 527
|
New best on the juice!
It's in the sig. Definitly be in the 10's by the in of the year.
Randy
------------------
94Z 355 cid Hughes performance TH350 with 4000 TC, ported and polished 2.00, 1.57 valve heads, ported intake, 52mm TB, Bullet custom grind cam, Comp cams R series lifters, Hooker LT's, custom dual exh. with dynomax bullet mufflers,CSI elec. WP,MSD Digital 6+ ign,Autogage 5" monster tach with shiftlite,AC delete pulley, CC pro mag 1.6 rockers, Forged Ross pistons, 11:1 cr,B&M Pro stick shifter, eagle rods, polished stock crank,balanced rotating assembly , 24lb SVO injectors,Nitrousworks wet kit, AFPR, pcmforless custom program, alston SFCs, boxed LCAs with relocation brackets, tubular panhard rod,chassis engineering 8-point rollbar with 5-point harness, BMR Trac Pak, moser 12 bolt with 4.10's,1LE DS,Hurst line lock, eibach drag launch kit and airbag, HAL 12 way adj struts,CE 3-way adj. shocks, 15x3.5 front and 15x8 rear Weld Draglites with 27x11.5x15 Hossier QTP's. 1.607 60ft 7.62 @ 89.62 mph 1/8 12.02 @ 110.48 mph on motor.
1.55 60ft 7.16 @ 96.04 mph 11.27 @ 118.41 mph (125 shot) Shooting for 10's
In memory of the greatest
#3 Dale Earnhardt The Intimidator
__________________
94Z 383 LT1, AI 200cc Dominator LT1 heads and intake,1.75 Hooker LT's,58mm TB,Jesel shaft rockers, 42# injectors,Bullet soild roller camshaft,Powerglide/5400 TC,Moser 12bolt/spool/5.14's,tuning by Alvin@PCMforless Hoosier 30x10.5x15 radial slicks,raceweight 3300lbs.
1.32 60ft, 4.15 330ft 6.55@101 mph 1/8
|
|
|
|
07-14-2002, 08:43 PM
|
#2
|
|
Registered User
Join Date: May 1999
Location: Apex, NC USA
Posts: 310
|
damn :P were upi at rockingham last night?
did bob get his car back together yet?
__________________
Chris Rose
1995 Camaro Z28 - 383ci, custom cam, SLP CAI & Catback, 3.73's, Edge 3000 stall, CPT "Pro Race" Transmission
12.129 @ 109.93mph & 7.583 @ 90.05mph
|
|
|
|
|
07-14-2002, 11:27 PM
|
#3
|
|
Registered User
Join Date: Aug 1998
Location: raleigh, nc, usa
Posts: 87
|
Congrats Randy. Any plans on moving to a 150 or 200 shot? 
------------------
93 Z28: built a4, 3.73's, 58mm tb, slp headers/ypipe/straight pipe, borla catback, ram air, Vigilante, hypertech chip/thermo, stb, msd coil, bmr subframes lca's and relocators, manual iat, !km
best full pass on street tires (pre-tc): 13.177 @ 107.21 (2.064 60 ft)
best full 1/8 on streets (pre-tc): 8.44 @ 84.23
For Sale: http://clubwest.dyndns.org/
91 GSX: SOLD!! AWD/16G/M5/All the goodies.
__________________
98 BMW M3 Sedan: M5, all options, STB, X-brace
93 Z28: SOLD!! built a4, 3.73's, 58mm tb, full exhaust, ram air, Vigilante, chip, suspension, tuning
best full pass on street tires (pre-tc): 13.177 @ 107.21 (2.064 60 ft)
best full 1/8 on streets (pre-tc): 8.44 @ 84.23
92 Stealth RT Turbo: SOLD!! m5, upped boost, free mods
91 GSX: SOLD!! AWD, 16G, M5, All the goodies.
|
|
|
|
|
07-14-2002, 11:56 PM
|
#4
|
|
Registered User
Join Date: Oct 1998
Location: Engelhard, N.C.
Posts: 527
|
Ya Rich, may move up to a 175, but that's it.
Randy
__________________
94Z 383 LT1, AI 200cc Dominator LT1 heads and intake,1.75 Hooker LT's,58mm TB,Jesel shaft rockers, 42# injectors,Bullet soild roller camshaft,Powerglide/5400 TC,Moser 12bolt/spool/5.14's,tuning by Alvin@PCMforless Hoosier 30x10.5x15 radial slicks,raceweight 3300lbs.
1.32 60ft, 4.15 330ft 6.55@101 mph 1/8
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 08:51 AM.
|
