Forged Lunati 383 crank, Mahle piston rings, Isky endurance dual springs
#1
Forged Lunati 383 crank, Mahle piston rings, Isky endurance dual springs
Used Lunati racer series crank (discontinued)
USA 4340 non twist forging
.140 fillet radii
Part number is CJ117BN
Cammed for 5.85" or longer rods
Had the crank polished, magged, miked, and checked for straightness
$1500+ new
$500 + shipping
Mahle Performance piston rings 4.030
part number 4035MS-15
1.5/1.5/3.0mm
Plasma moly top, ductile iron 2nd, std tension oil ring
Went with Total Seals, don't need these
Never filed, unused, usually $115
$65 shipped
Isky 9005 Plus endurance dual valve springs
1.530 OD, fit perfectly in retainers that come with AFR heads
Tool room outer spring, chrome silicon inner
Never installed, $300+ new
$220 + shipping
Pics of crank over @ LTXTECH Forums
PM ME to get my attention. I can also be found over at ltxtech or ls1tech under the same name.
USA 4340 non twist forging
.140 fillet radii
Part number is CJ117BN
Cammed for 5.85" or longer rods
Had the crank polished, magged, miked, and checked for straightness
$1500+ new
$500 + shipping
Mahle Performance piston rings 4.030
part number 4035MS-15
1.5/1.5/3.0mm
Plasma moly top, ductile iron 2nd, std tension oil ring
Went with Total Seals, don't need these
Never filed, unused, usually $115
$65 shipped
Isky 9005 Plus endurance dual valve springs
1.530 OD, fit perfectly in retainers that come with AFR heads
Tool room outer spring, chrome silicon inner
Never installed, $300+ new
$220 + shipping
Pics of crank over @ LTXTECH Forums
PM ME to get my attention. I can also be found over at ltxtech or ls1tech under the same name.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
ZBLKHELLRZR
Drag Racing Technique
4
08-18-2002 07:57 AM