irocz383
03-19-2003, 12:11 PM
Is there a guage or something I can hook up to the block to find out what my compression ratio would be or is the mathamatical way the only way to do it?
I've got JE/SRP flat top pistons for 10.6:1 - 11.1:1 compression. 6" H-Beam rods, 3.75 stroke crank. AFR 190cc heads, I beleive they're sometihng like 68 cc or something like that. Also, the block was decked and the heads were resurfaced. Wouldn't that bump up the compression a little too?
Thanks!!
-Ken
I've got JE/SRP flat top pistons for 10.6:1 - 11.1:1 compression. 6" H-Beam rods, 3.75 stroke crank. AFR 190cc heads, I beleive they're sometihng like 68 cc or something like that. Also, the block was decked and the heads were resurfaced. Wouldn't that bump up the compression a little too?
Thanks!!
-Ken