grimjeeper73
02-14-2009, 02:59 AM
i have a 95 z 28 i have a creaking/rubbing noise in the back that sometimes will go away for a day or 2 but then it will come back any ideas on what this annoying noise is
|
||
rear suspension noisegrimjeeper73 02-14-2009, 02:59 AM i have a 95 z 28 i have a creaking/rubbing noise in the back that sometimes will go away for a day or 2 but then it will come back any ideas on what this annoying noise is n2ceptor 02-14-2009, 09:19 AM Control arm bushings??? Panrod bushings??? Sway bar end links??? Shock??? Rubber donut on top of spring???? Are the bushings stock or aftermarket??? Poly bushings will make noise...:) grimjeeper73 02-14-2009, 02:30 PM its all stock it sat in a garage for three years it only has 63000 miles on it maybe i have some dry rotted bushings? n2ceptor 02-14-2009, 03:27 PM You might try spraying a white lithum grease like Permatex #81981 in and around the bushings...... Could help.. Wont hurt... DO NOT use anything like WD40, a penetrating oil.... This will degrade the rubber...:) steelerfan 02-16-2009, 03:59 PM I had the same thing,turned out to be the LCA bushings,spraying them didn't help mine,rather then just replace them bushings which can be a lot of work I replaced the LCA's with units that had poly bushings with gease fittings,that took care of the problem grimjeeper73 02-17-2009, 12:32 AM sometimes i also get a dragging metal on metal noise but i just put new brake pads all the way around so now im tryin 2 figure out if its one or 2 problems :confused: n2ceptor 02-17-2009, 03:43 PM sometimes i also get a dragging metal on metal noise but i just put new brake pads all the way around so now im tryin 2 figure out if its one or 2 problems :confused: There are grease points on the calipers.. Did you grease ????? Alot of people forget about this and it could cause the pad to stick...:) grimjeeper73 02-18-2009, 08:49 PM im gonna try that i bet 100 dollars thats what it is because i didnt even see that thanks | ||