squinn
11-20-2002, 07:39 PM
Set of 8 bosch 36 lbs injectors $225 obo
J&S Electronics Safeguard with Knock Monitor, works on LT1 or any std V8.
Would be great for SC or turbo motor on pump gas $325 obo
Edelbrock Vic jr intake setup for LT1 heads for carb setup, $175 obo
JW SFI flexplate for 87 and up SBC $60 obo
4.10 gears for 9" Ford $50 obo
Comp Cams Pro-Magnum Non-Self-Aligning Roller Rocker Arms, 7/16" stud, 1.6 Ratio, guide plates, 7/16 studs $200 obo
Detroit soft locker for 31sp 9" Ford $275 obo
2 LT1 2-bolt blocks, one is a stock short block with some spun rods $150 obo
2nd one a bare block that needs a .040 over bore, its drilled for 4 bolt main, no caps $150 obo
Cam motion hyd roller 242/251 584/592 w/1.6 rr on a 108 lc made 560 engine HP @ 7000rpm with my stock short block 350 and lt1 heads, best et was 10.54@127, best mph was a 10.59 @ 129.
I'm selling cam, Cran hyd roller lifter, AFR hdydr rev kit and valve springs for $450
MSD 6A box $60
4 - 97' Z28 16" 5 spoke wheels, silver in color, very low miles, mint $180 obo
2 - BFG comp TA ZR 245/50/16 tires with 85% tred left $100 obo
Alum tubing 2- 90* 4" 6061 bends and 3 ft of 4" tubing $75 obo
17 Smith bros push rods with 210*b for T&D rockers 7.035 long 5/16 .084 wall, 10 pass on them, new $170, selling for $80 obo
16 pushrods 5/16 .084 wall 7.155 long $50 obo
J&S Electronics Safeguard with Knock Monitor, works on LT1 or any std V8.
Would be great for SC or turbo motor on pump gas $325 obo
Edelbrock Vic jr intake setup for LT1 heads for carb setup, $175 obo
JW SFI flexplate for 87 and up SBC $60 obo
4.10 gears for 9" Ford $50 obo
Comp Cams Pro-Magnum Non-Self-Aligning Roller Rocker Arms, 7/16" stud, 1.6 Ratio, guide plates, 7/16 studs $200 obo
Detroit soft locker for 31sp 9" Ford $275 obo
2 LT1 2-bolt blocks, one is a stock short block with some spun rods $150 obo
2nd one a bare block that needs a .040 over bore, its drilled for 4 bolt main, no caps $150 obo
Cam motion hyd roller 242/251 584/592 w/1.6 rr on a 108 lc made 560 engine HP @ 7000rpm with my stock short block 350 and lt1 heads, best et was 10.54@127, best mph was a 10.59 @ 129.
I'm selling cam, Cran hyd roller lifter, AFR hdydr rev kit and valve springs for $450
MSD 6A box $60
4 - 97' Z28 16" 5 spoke wheels, silver in color, very low miles, mint $180 obo
2 - BFG comp TA ZR 245/50/16 tires with 85% tred left $100 obo
Alum tubing 2- 90* 4" 6061 bends and 3 ft of 4" tubing $75 obo
17 Smith bros push rods with 210*b for T&D rockers 7.035 long 5/16 .084 wall, 10 pass on them, new $170, selling for $80 obo
16 pushrods 5/16 .084 wall 7.155 long $50 obo