importeater
06-23-2006, 09:50 PM
I got a check engine light.. took it to Autozone and had it scanned and came up with the code P1680. They guy said thats a dealer code, that he couldn't tell me what that was. I looked around online and all I can find says "DTC P1680 = Driver 5" What is driver 5? Sounds like a PCM problem, no? Anyone know?
Thanks for any help,
Craig
Injuneer
06-23-2006, 11:52 PM
I can't find any reference to that code in GM sources. It shows up as a Chrysler code. Are you sure it wasn't P1860 = TCC PWM Solenoid Circuit Electrical?
Shoebox has the LT1-specific OBD-I and OBD-II engine and tranny codes on his website, and P1680 is not included.
http://shbox.com/1/Dtcs.htm
importeater
06-24-2006, 08:23 AM
Yep positive. This is on my 04 Trailblazer. Here is where I found the code.
http://members.accessus.net/~090/dtcobd2p.html
moparman
06-24-2006, 09:11 AM
OK, everyone bookmark this page. It's the GM OBDII code decrypter. The 1680 code is listed.
http://service.gm.com/gmspo/mode6/index.html
ls1_bc
06-24-2006, 10:16 AM
OK, everyone bookmark this page. It's the GM OBDII code decrypter. The 1680 code is listed.
http://service.gm.com/gmspo/mode6/index.html
Good find moparman....Thanks
Injuneer
06-24-2006, 10:30 AM
Yep positive. This is on my 04 Trailblazer. Here is where I found the code.
http://members.accessus.net/~090/dtcobd2p.html
Next time you ask a question, particularly if its not even about an F-Body, PLEASE have the common courtesy to mention what vehicle its for.
:rolleyes: