1BADWS6
06-24-2005, 03:59 PM
The only item left to go in the engine bay is the engine harness, which we're re-pining to a 99+ harness. All you will see in that harness is the injector wires, which we are running on the inside of the fuel rails. :)
http://www.mustangmods.com/data/328/100_0399.jpg
Alternator relocated to the passanger side top. Tensioner is now where the alternator used to be:D
http://www.mustangmods.com/data/328/100_0400.jpg
http://www.mustangmods.com/data/328/100_0401.jpg
Coil packs are relocated to the trans tunnel just below the firewall
http://www.mustangmods.com/data/328/100_0402.jpg
http://www.mustangmods.com/data/328/100_0407.jpg
http://www.mustangmods.com/data/328/100_0404.jpg
Trans cooler mounted behind bumper
http://www.mustangmods.com/data/328/100_0405.jpg
The oil pan sits about 1.5" below the k-member. The 4" exhaust actually sits higher in the car than the oil pan.
http://www.mustangmods.com/data/328/100_0406.jpg
The Rossler TH400 and Neil Chance converter now sit in place of the 6-speed! I know it was supposed to be a stick car still....but plans have now changed!!! :devil:
http://www.mustangmods.com/data/328/100_0408.jpg
4" exhaust w/ a 4" Bullet, dumps right before the axle
http://www.mustangmods.com/data/328/100_0409.jpg
Weldon 2025 pump mounted on custom rear bumper, inside rear bumper cover. Stock tank sumped
http://www.mustangmods.com/data/328/100_0410.jpg
http://www.mustangmods.com/data/328/100_0411.jpg
Stay tuned for more pictures and hopefully if all goes well tonight and this weekend a video of the first start and hopefully a little dyno footage monday night ;)
Thanks Guys.
Kevin and the team.
http://www.mustangmods.com/data/328/100_0399.jpg
Alternator relocated to the passanger side top. Tensioner is now where the alternator used to be:D
http://www.mustangmods.com/data/328/100_0400.jpg
http://www.mustangmods.com/data/328/100_0401.jpg
Coil packs are relocated to the trans tunnel just below the firewall
http://www.mustangmods.com/data/328/100_0402.jpg
http://www.mustangmods.com/data/328/100_0407.jpg
http://www.mustangmods.com/data/328/100_0404.jpg
Trans cooler mounted behind bumper
http://www.mustangmods.com/data/328/100_0405.jpg
The oil pan sits about 1.5" below the k-member. The 4" exhaust actually sits higher in the car than the oil pan.
http://www.mustangmods.com/data/328/100_0406.jpg
The Rossler TH400 and Neil Chance converter now sit in place of the 6-speed! I know it was supposed to be a stick car still....but plans have now changed!!! :devil:
http://www.mustangmods.com/data/328/100_0408.jpg
4" exhaust w/ a 4" Bullet, dumps right before the axle
http://www.mustangmods.com/data/328/100_0409.jpg
Weldon 2025 pump mounted on custom rear bumper, inside rear bumper cover. Stock tank sumped
http://www.mustangmods.com/data/328/100_0410.jpg
http://www.mustangmods.com/data/328/100_0411.jpg
Stay tuned for more pictures and hopefully if all goes well tonight and this weekend a video of the first start and hopefully a little dyno footage monday night ;)
Thanks Guys.
Kevin and the team.