Dee94Z28
01-25-2005, 05:59 PM
Hey guys and gals, I need a good mechanic for my Z28 in PA roughly around the poconos area.I might have a blown head gasket and a couple other little problems . Need help please. :( I 've heard about rapid motors and they sound like they are good just checking if there are any other shops or mechanics I can be refer too.
94 Z28 A4 T-tops
Moroso CAI
1LE elbow
BMR strut tower brace
Carsound hi flow cat
Magnaflow cat back
RBE17
01-25-2005, 08:19 PM
I have a friend in Reading that would probably be interested in the job. You'd have to get the car to him, though.
Later,
Steve.
ws6mikey
01-26-2005, 08:31 AM
I have a 30' enclosed trailer with a winch if it needs to be picked up. 610-404-7979
Dee94Z28
01-26-2005, 07:30 PM
Hey mikey, thanks when is the best time to give you a call? Also RBE17 thank you for your reply. Also I was thinking about lt4 hot cam kit?
ws6mikey
01-28-2005, 04:20 PM
Hey mikey, thanks when is the best time to give you a call? Also RBE17 thank you for your reply. Also I was thinking about lt4 hot cam kit?
Call Anytime. Trailer is occupied at the moment. There's a race car on it waiting for a new motor :D
BlackDog
01-31-2005, 06:47 PM
Hey guys and gals, I need a good mechanic for my Z28 in PA roughly around the poconos area.I might have a blown head gasket and a couple other little problems . Need help please. :( I 've heard about rapid motors and they sound like they are good just checking if there are any other shops or mechanics I can be refer too.
94 Z28 A4 T-tops
Moroso CAI
1LE elbow
BMR strut tower brace
Carsound hi flow cat
Magnaflow cat back
We can do the work for ya.
Go here - http://performanceworks1.com/
We are located in Northampton PA, not far from Bushkill.
Dee94Z28
02-02-2005, 06:58 PM
Hey blackdog thank you for your reply, nice Z28 in a couple weeks when I am on vacation I will try to get the car checked out so I know what direction to take with the engine and the trans because the car has over 113K. The car run strong but if I have a blown head gasket Is it worth just fixing the gasket or put alittle work into the engine . It was once a daily driver until I brought a second car. So now it will only come out in the spring and summer. I will like to beef up the performance alittle. :) Any feed back with suggestion is highly welcome thank you :)
BlackDog
02-04-2005, 07:15 PM
Hey blackdog thank you for your reply, nice Z28 in a couple weeks when I am on vacation I will try to get the car checked out so I know what direction to take with the engine and the trans because the car has over 113K. The car run strong but if I have a blown head gasket Is it worth just fixing the gasket or put alittle work into the engine . It was once a daily driver until I brought a second car. So now it will only come out in the spring and summer. I will like to beef up the performance alittle. :) Any feed back with suggestion is highly welcome thank you :)
Some suggestions might be to put a cam in, 1.6 rocker arms since you will be taking the heads off anyway. I can do a port job on the heads and intake as well. I can custom tune your car for more performance. We can do all this at a very reasonable price.
Send me a private email for more info if you like.