General 1967-2002 F-Body Tech For general F-Body discussion that does not fit in any other forum.
For F-Body Technical/Information Discussion ONLY

what route to go?

Thread Tools
 
Search this Thread
 
Old Jul 10, 2004 | 11:32 PM
  #1  
camzaro28's Avatar
Thread Starter
Registered User
 
Joined: Apr 2004
Posts: 1,046
From: Fargo, ND
what route to go?

first off i dont know if i am in the right forum, so please move if needed admin!!

ok so far i have the mods in my sig, this upcoming weekend i am going to get tune up so the car is running at par. well since i have put the cut-out i have noticed a significant difference in low end torque. so i am looking into getting a 3000 stall to make up for the torque loss. i was wondering now that i have these mods what else is needed for supercharger? i mean is this in anyway a good set-up or do i need to do anything else first? goal i sto get into the 12's. right now i only have 47,000 miles on 97 lt1! so what do u guys think? well see ya later!

please reply
Old Jul 13, 2004 | 12:30 PM
  #2  
Compstall's Avatar
Registered User
 
Joined: Dec 2000
Posts: 2,442
From: Tacoma, WA, USA
2800 is the ideal stall speed for a stock LT1.

You can put a supercharger on any time you want. I would put back an extra $1,000 or so for tuning and minors as well.
Old Jul 13, 2004 | 05:38 PM
  #3  
BiGGinZ's Avatar
Registered User
 
Joined: Sep 2003
Posts: 805
From: California
Yea I would think you would want to upgarde some of the things in the fuel line like injectors and things.
Old Jul 13, 2004 | 06:03 PM
  #4  
BiGGinZ's Avatar
Registered User
 
Joined: Sep 2003
Posts: 805
From: California
Oh and you should try to put this in forced induction you will get more responces.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
4586
LT1 Based Engine Tech
42
Nov 18, 2023 07:21 PM
POLOVETTE 94
Fuel and Ignition
4
Aug 21, 2015 07:11 PM
Pestilence
New Member Introduction
5
Aug 18, 2015 06:19 PM
67LT1Bird
Forced Induction
19
Feb 5, 2003 02:51 PM
94z28jbw
LT1 Based Engine Tech
9
Jan 31, 2003 11:57 PM




All times are GMT -5. The time now is 03:03 PM.