What size jets should I be looking at running here?

Hey all

I'm looking to run a dual stage 100 shot for a total of 200hp on my motor. I have an NX nozzle and a NOS nozzle.

I have a bunch of jets here but i'm not sure what the power levels on each are rated at. Is there a formula to figure this out? I assume you would want to always assume high nitrous pressure and low fuel pressure? To keep from running lean?

If anyone can give me sizing for a 50 shot and a 100 shot that would be great!

Originally posted by Serene
Hey all

I'm looking to run a dual stage 100 shot for a total of 200hp on my motor. I have an NX nozzle and a NOS nozzle.

I have a bunch of jets here but i'm not sure what the power levels on each are rated at. Is there a formula to figure this out? I assume you would want to always assume high nitrous pressure and low fuel pressure? To keep from running lean?

If anyone can give me sizing for a 50 shot and a 100 shot that would be great!

More nitrous and less fuel = lean
Too much fuel and not enough nitrous = rich

You want rich over lean.

which is exactly what i put. if you pick jets while assuming nitrous pressure is always 1200 or so and fuel is at 38 psi or whatever, you will be picking a nitrous jet that has a smaller hole, and a fuel jet that has a bigger hole, so you dont have to worry about overpressure nitrous situations, sure you may get less hp, but wont go lean.

hope that made sense.

The search function is nice!

http://web.camaross.com/forums/showthread.php?s=&threadid=196996&highlight=jets

Rich Krause

http://www.azsupersport.com/nitrousjetcalc.asp is that a fairly good calculator?

What should I be using as fuel pressure? Isnt it about 38psi?