Anyone running a 284 NitrousHP cam?
Registered User
Joined: Sep 1999
Posts: 2,342
From: MI
I have it ready to install, along with E-Tec 200 heads, RamJet Intake, 36lb injectors, 1.6 Crane roller rockers, and SLP 1-3/4" headers. And an NX Kit ready to punish the internals 
I wish it was running because it's going to sound BAD ASSED.:d Goodluck!
------------------
Denny Villemure
1989 Camaro IROC-Z Convertible, 305 TPI, 2.73 Gear, Flowmaster 2 chamber. 15.60 on motor, 14.20 on a 75 shot from NX. Woo hoo!
www.denny.cz28.com
I wish it was running because it's going to sound BAD ASSED.:d Goodluck!
------------------
Denny Villemure
1989 Camaro IROC-Z Convertible, 305 TPI, 2.73 Gear, Flowmaster 2 chamber. 15.60 on motor, 14.20 on a 75 shot from NX. Woo hoo!
www.denny.cz28.com
Thread Starter
Registered User
Joined: Aug 2000
Posts: 175
From: San Antonio, Texas USA
I'm being nickle and dimed to death. LOL..my fans are not good enough..so I have to order Flexalite #220 dual fans and then 2 gauges..then it will be aaalllliiiivveee! ALIVE I SAY! Just wanna hear what one of these sound like.. (2 weeks eta to start my setup).
Registered User
Joined: Sep 1999
Posts: 21
From: las vegas nv
I ran that cam....in a 383....
I run 1 5/8 headers with a self made 2.5 exhuast with X pipe.....and two dynomax bullets.....
It was way loud before the x pipe.....
It sounded .....perfect.....
Now its got a isky street roller (solid)
I run 1 5/8 headers with a self made 2.5 exhuast with X pipe.....and two dynomax bullets.....
It was way loud before the x pipe.....
It sounded .....perfect.....
Now its got a isky street roller (solid)
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM