Blower .bin files.

I was wondering if anyone has any .bin files for a blown car they could post or email. I was just looking for some files i could look at to help get my car tuned in. Car is in sig if that helps.

Thanks for any help. http://web.camaross.com/bb/smile.gif
Travis




------------------
1994 Z28 M6 Hardtop
355 LT1, Forged H-beam rods, Speed-Pro Blower Pistons,Speed Pro Rings,Pistons,Clevite 77 Bearings, Comp Cams 218/230 .528/.544, comp 987 springs, titanium retainers, 10* locks, comp cams 1.6 RR's, CSI Water pump,MSD 6AL,Cloyes Double Roller, Hooker LT's, True 3" Dual Exhaust with Delta Force Flowmasters, Spec Stage III Clutch,Relocated MAF, 42lb SVO's,12psi ATI Procharger.

I just got the tunercat license today. If you want my bin file, e-mail me and I'll try to get it to you.

It's lean at idle but looks OK at cruise and good at WOT. It's for 36lb injectors no FMU with 6 psi. If you've got bigger injectors it might work well for you.

------------------
Supercharged 94 Formula Coupe M6, 355ci LT1 10.2CR, 6 psi PD, 218/230/114, 1.6RR, 36lb/hr, TRW L2256F, PM rods, ARP rod bolts and 2 bolt main studs, mild port and polish, 1.94/1.50 Race Flo valves, MSD 6BTM, CSI electric WP, Ed Wright tuning, inline fuel pump, Pacesetter 1 5/8” mid length headers, MAC catback, Torque arm & SFC’s, AL DS, LCA’s, PHR, big ass sway bars

If ya find any Tunercat blower bins out there, could you share the wealth. I am also in need of a blower file for a 388CI stroker, with an ATI 8psi kit,40lb injectors, hooker headers and catback, less the cat of course, and a 218/224 @114ls and a 108cl .528/.535 custom ground camshaft in a 6spd '94 TA. I need 500 miles on the motor before I can get it into the dyno for the official tune. I just need something close right now.
Thanks

Brent Franker has about two or three on his site.