pattymelt1285 07-27-2002, 07:17 PM For those of you that care my 1994 Z28 LT1 auto made 336 rwhp and 331 rwtq, with stock ported heads, cam, and long tubes with a stock tune. It was running rich. I cant wait to see what it will put down with a larger cam, custom tune, and 3500 stall. Also my girlfriends 94 Cobra put down 246 rwhp and 300 rwtq, with just a x-pipe, catback and cold air. Not to shabby.
------------------
1994 Camaro Z28 A4 My Camaro & Mustang (http://camaroz28.cardomain.com/member_pages/view_page.pl?page_id=157853)
------------------
Motor: 355 c.i. TRW forged pistons 10.4:1, N2O, ported and polished heads 254/191 @.600, cc305 (220/230 114), Comp. Pro-Magnum 1.6 rr's, Hooker LT's, Loudmouth, 52mm TB, K&N FIPK, Meziere, BVPerformance tuning...
------------------
Show: SCC SS hood, 98+ SS spoiler, 98 17" SS rims
1989 Mustang LX 5.0
------------------
Twin T3 Turbos, Coast High 347
Smoke T/A 07-27-2002, 07:42 PM Should have came over to fasttek The z dynoed 385/345 with a low rpm miss? Not to shabby. http://web.camaross.com/bb/biggrin.gif
Joe
pattymelt1285 07-27-2002, 07:44 PM Not bad... lets just see what my Z will put down with some new mods.
pattymelt1285 07-27-2002, 07:48 PM I miss nitrous... http://web.camaross.com/bb/frown.gif
cj383 07-27-2002, 08:41 PM <font face="Verdana, Arial" size="2">Originally posted by pattymelt1285:
For those of you that care my 1994 Z28 LT1 auto made 336 rwhp and 331 rwtq, with stock ported heads, cam, and long tubes with a stock tune. It was running rich. I cant wait to see what it will put down with a larger cam, custom tune, and 3500 stall. Also my girlfriends 94 Cobra put down 246 rwhp and 300 rwtq, with just a x-pipe, catback and cold air. Not to shabby.
</font>
Nice! What cam are you gonna get?
pattymelt1285 07-27-2002, 08:44 PM I dont know, prob a cc306 or a custom n2o cam.
bad95z28 07-27-2002, 10:44 PM My pos did 324/316. Not too bad but much room for improvement.
Michael
------------------
Black 94Z A4 t-tops
!traction
"Mods? Nah, its stock with a bad miss and loud exhaust."
60ft: 2.03
1/8th: 8.58 @82.69 w/ a burned plug wire
The Z (http://www.michaelpoirot.cz28.com)
blksunshine 07-28-2002, 01:55 AM Where did you do the dyno at?
Are you going to do the cam install yourself?
------------------
Blk 94 Z28,355 c.i.,TRW forged pistons,Gtp Stage II Heads,
GTP 393 Cam,1.6rr,58mm T.B.,Moroso CAI,Hooker LT's,Borla,
2800 Vig,Ed Wright tunning,3.23's,Tranny cooler,Spohn LCA's
pattymelt1285 07-28-2002, 01:34 PM I dynoed at Speedtek in Dallas. But this think is running pig rich at like 13:1 a/f. So there is still some more in it with a good tune. But I am going to do the cam install myself but prob not for a few more months.
[This message has been edited by pattymelt1285 (edited July 28, 2002).]
bad95z28 07-28-2002, 01:40 PM You must have came after we left. What time did you get there? We left at about 11:15 or so.
Michael
pattymelt1285 07-28-2002, 05:13 PM I got there at 12:30. I ment to be there at 9!
95ChameleonTA 07-28-2002, 06:00 PM not bad, you should have dyno your turbo mustang http://web.camaross.com/bb/wink.gif done anything new to it latey?
------------------
Scott Endersby
95 Chameleon Trans Am M6
306cam, ported heads flow #255/193, 30lb Ford Motorsports injectors, hooker LTs, 2.5in y-pipe,SLP Loudmouth, CSI WP, 58mm BBK TB, 1.6 Pro-Magnum RRs, 10308-1 Spring, Cloyes Double Timing chain, CC "R" lifters, 160 Thermostat, Hurst, MAF, K&N CAI, Eibach springs, Lou's short stick, LGM Abj. Pandhard, MSD coil, Nitto DRs, TB bypass, LGM adj. lower control arms, LGM STB, LT1 Edit
1/4 mile and dyno soon
homepage (old info)www.95chameleonta.cz28.com (http://www.95chameleonta.cz28.com)
pics Yahoo photos (http://photos.yahoo.com/lumpyse)
Hooker LTs + 2.5" ypipe + Loudmouth= Cop Quote "Ungodly Loud!" http://web.camaross.com/bb/smile.gif
July 1, added Bullet muffler.
[This message has been edited by 95ChameleonTA (edited July 28, 2002).]
|
|