OBD1 PCM....
Was done by MustGoFaster and I modified the tune a little..It is a 95 PCM and here is what it is programmed for..
30# injectors,3.42 gears,LT's,Stage 2 Heads,GTP-6 Cam 236/242 .568/.592" on a 112ls,Idle was set to 850rpms I believe,all emission stuff was turned off..
I will take $175 +shippin which I think is a great deal if someone has a set-up relating to mine..Usually a unmodified PCM is $125 or so and a tune is around $150-$350 depending on who you use..
Email if you have any questions..
Thanks
Cody
------------------
97 30th Anniv Camaro SS #2374~ Bright Red,M6,Pro 5.0,Torsen Diff.,Oil Cooler,LT4KM,Ported LT1 Heads(GTP),GTP Custom Cam,Comp. Magnum 1.6" RR's,Chromoley Pushrods,Edelbrock Double Roller,Meziere,52MM BBK TB,Hooker LT's w/ Custom 3" Y-pipe,Borla,NGK TR55's,BMR STB,SLP CAI,30# Inj.,OBD1PCM,stock 3.42's,stock clutch
Dyno #'s~ 370rwhp/353rwtq
Currently down for a forged 383 Stroker..
My SS
E.T.F.A East Texas F-Body Assoc.
-Kiss my SS-
30# injectors,3.42 gears,LT's,Stage 2 Heads,GTP-6 Cam 236/242 .568/.592" on a 112ls,Idle was set to 850rpms I believe,all emission stuff was turned off..
I will take $175 +shippin which I think is a great deal if someone has a set-up relating to mine..Usually a unmodified PCM is $125 or so and a tune is around $150-$350 depending on who you use..
Email if you have any questions..
Thanks
Cody
------------------
97 30th Anniv Camaro SS #2374~ Bright Red,M6,Pro 5.0,Torsen Diff.,Oil Cooler,LT4KM,Ported LT1 Heads(GTP),GTP Custom Cam,Comp. Magnum 1.6" RR's,Chromoley Pushrods,Edelbrock Double Roller,Meziere,52MM BBK TB,Hooker LT's w/ Custom 3" Y-pipe,Borla,NGK TR55's,BMR STB,SLP CAI,30# Inj.,OBD1PCM,stock 3.42's,stock clutch
Dyno #'s~ 370rwhp/353rwtq
Currently down for a forged 383 Stroker..
My SS
E.T.F.A East Texas F-Body Assoc.
-Kiss my SS-
I've also got a OBDI box done by Dave for my 396 LT1. #30's etc. It is plug/play in an OBDII car...GTP6 cam, 6-speed, etc.
email me at 02hawk@***.net if interested.
Cheap, it's been sitting for almost a year.
------------------
'02 White M6 1LE Firehawk Trans-Am #0140, ~stock. 326/346 @ 3700 miles.
Spohn TA/BMR SFC/STB, Pro 5, Scanmaster, Auto-Tap (no laptop)
2001 CBR 600 F4i--D&D slip on, Power Commander
1991 Nissan Pickup--CBR Hauler, daily driver I'm not racing the truck)
Former car: 1997 Z28 396 (GTP H/C) LT1 with 441/437 to the wheels, bought by State Farm 6-28-01.
Check out my growing site at Pics and Vids
email me at 02hawk@***.net if interested.
Cheap, it's been sitting for almost a year.
------------------
'02 White M6 1LE Firehawk Trans-Am #0140, ~stock. 326/346 @ 3700 miles.
Spohn TA/BMR SFC/STB, Pro 5, Scanmaster, Auto-Tap (no laptop)
2001 CBR 600 F4i--D&D slip on, Power Commander
1991 Nissan Pickup--CBR Hauler, daily driver I'm not racing the truck)
Former car: 1997 Z28 396 (GTP H/C) LT1 with 441/437 to the wheels, bought by State Farm 6-28-01.
Check out my growing site at Pics and Vids
I also have a obd 1 pcm programed by mustgofaster. programed for hotcam, headers, 160 t-stat, 6 speed, 373 gears if any one wants it. 175 is good with me also. send me mail if your are interested.
I just happen to have a OBD1 computer also, but its still in my car, and will stay in my car, but if I were to sell it, I do think I wouldnt barge in on someone elses post who is trying to sell that product, and attempt to sell yours. I think thats called manners?
Hope you have it sold Cody.
Kyle
------------------
Kyle aka Shaggy
Purple 95 Formula
ETFA
12.00@116
Hope you have it sold Cody.
Kyle
------------------
Kyle aka Shaggy
Purple 95 Formula
ETFA
12.00@116
Thread
Thread Starter
Forum
Replies
Last Post
whitehooptie
Computer Diagnostics and Tuning
3
Aug 10, 2015 07:02 AM
88IROC_Z
Computer Diagnostics and Tuning
2
Jul 22, 2015 11:38 PM
sfGi8nt
LT1 Based Engine Tech
3
Mar 15, 2004 03:27 PM



