|
||
detonation? relay?OffspringZ28 08-14-2002, 10:34 PM what does detonation sound like? when i spray i hear a ticking noise (does not sound painful). i was wondering if it might be the wiring relays clicking around? any help is appreciated as im not going to spray until i get this worked out. i have ngk tr5's and stock ignition and stock knock module. TheZ 08-14-2002, 11:33 PM good question OffspringZ28 08-15-2002, 07:39 PM anyone? XKnightRider 08-16-2002, 02:28 PM Could be one of two things, your solonoids are pluseing or your are getting pinging. Pinging would sound like marbles in your intake at the higher RPM's like over 4500. With out N20 spraying do you get the noise at WOT above 4500RPM to redline? Pulsing would sound more like a clicking and your N20 performance would not be that great. Do you have a FPSS? If so it may need adjusted. ------------------ 2002 Camaro SS #3586 6M Sebring Silver, T-top, Billet Grille, Hurst shifter, !CAGS, Whisper CF Lid, Holly PowerShot filter, Corsa Catback w/full polish tips, 160 Thermo, SLP fan switch, ASR reverser, TA axle cover w/stud kit, MAFT, NX wet kit(150)purge,heater,remote opener, FPSS,MSD WS, Autometer gages, Hotchkis STB, LCA's, APHR, ET Streets(no times yet). On order: SLP Line lock, radiator, Bellows. Baseline Dyno: 317.9RWHP 335.9RWTQ with MAF ends only: 325.6RWHP 350RWTQ. (Stock)1st 1/4 mile 13.46 @106.9 2.23-60':( new best 13.306 @107.89 2.12 60' 4-sale MAF ends....now using N20 so need to ditch them. http://members.cox.net/sscargo/Camaro.htm OffspringZ28 08-19-2002, 12:42 AM no i dont get pinging in the upper rpms without the spray, i am beginning to think its the solenoids, any ideas? how can i adjust the fpss? | ||