Need a posi for the 10-bolt
Thread Starter
Registered User
Joined: Feb 2001
Posts: 878
From: Clovis, NM
Need a posi for the 10-bolt
I need a posi unit for my 2 85' camaros.
The first one is for the iroc and it needs to be fairly strong.
The second one is going to the 85' camaro with a 95' 3.4L and it dosen't have to be super strong.
Both have the stock rear ends and are the 3.08 and lower type carrier.
Any one have any good units in mind?
The first one is for the iroc and it needs to be fairly strong.
The second one is going to the 85' camaro with a 95' 3.4L and it dosen't have to be super strong.
Both have the stock rear ends and are the 3.08 and lower type carrier.
Any one have any good units in mind?
Registered User
Joined: Jul 2002
Posts: 325
From: charleston sc usa
go to www.racenet.net and see if they still have auburn take off differentials(posi) i got one for 180
Registered User
Joined: Feb 2000
Posts: 825
From: Stamford, VT
I used the zexel torsen diff from slp ($85) and bought 28 spline axles from Moser.
You can probably get stock 28 spline axles used for very little money. I like the zexel so far. It seems pretty strong (I don't know of many 4th gen guys breaking them), and they don't wear out like the clutch type diffs.
You can probably get stock 28 spline axles used for very little money. I like the zexel so far. It seems pretty strong (I don't know of many 4th gen guys breaking them), and they don't wear out like the clutch type diffs.
Thread
Thread Starter
Forum
Replies
Last Post
Henson071
Parts For Sale
0
Sep 21, 2015 04:31 PM