Scoulter

Anyone out there have some tips for me on installing my white gauge face overlay kit? I have a 1999 SS.

Thanks for your help

VegasZ

Put the needles through the holes and then slip the new face on without taking the needles off. After its on, make sure none of the needles are touching, even slightly, or else they will stick. Use double sided tape or a little glue in the spots where the new face bubbles up and touches the needles.

AW/whiteZ-28

Make sure your hands are EXTREMELY clean.
and when you do the final push down on the gauges to set the double sided tape go from the inside out.

Scoulter

Thanks for the tips guys. See ya on the road.