If anyone knows of a used supercharger kit for sale for a LT1 or finds anything let me know. I have looked on many boards and ebay with no luck. I don't want to spend a ton but you can find some pretty decent deals on used kits. Any help is greatly appreciated. Thanks, Jarred

 

Not sure how much you want to spend...here is a new kit that is decently priced...You requested a price quotation for: Powerdyne Supercharger Kit for 93-97 GM Camaro/Trans Am with 5.7L (4.5 psi/satin) [more info]
Part Number: PD-K10503-101
SuperchargersOnline.com*: $2,599.00
List Price: $3765.2
You Save: $1166.2

This Powerdyne Supercharger Kit bolts on upto 50% more horsepower and torque and features an internal set-up Silentdrive that incorporates a reinforced toothed timing belt and an advanced design Hyperdyne impeller. This Powerdyne is a fully self contained unit which does not require complicated plumbing to the engine oil supply. This vastly simplifies installation and also means the blower operates at much lower temperatures which translates into a cooler charge temperature. All of this results in an incredibly quiet and powerful supercharger.

Powerdyne's newest kit has just been released and fits the popular 5.7L LT-1 engine used in 1993-97 Z-28 Camaro and Firebird. This new kit has produced astounding horsepower increased over this already stout engine. Power boosts exceeding 40% have been recorded even with a modest 4.5PSI of boost pressure. The Powerdyne LT-1 kit also includes a specially designed Crane ignition module and a high volume electric fuel pump.

Each Powerdyne Centrifugal Supercharger Kit is thoroughly engineered for an easy, trouble-free installation. Every component is designed for a precision bolt-on fit, and all necessary hardware, parts and pieces are provided. Each Kit comes 100% complete and ready to bolt on to the stock engine setup. All Powerdyne superchargers fit completely under the hood and do not interfere with the operation of any of the stock emissions systems or engine accessories.

This Kit Includes the Following:
Supercharger Head Unit
Yes
Mounting Brackets, Hardware, & Hoses
Yes
Fuel Management Unit (FMU)
Yes
By-Pass Valve Kit
No
High-Flow Fuel Pump
No
Ignition Controller (Boost Retard)
No
K&N High-Flow Air Filter System
Yes
Intercooler/Aftercooler
No
Required To Tap The Oil Pan
No
Hope this helps...
John

 

A little more than I want to spend and am really looking for a used Vortech kit but I am open for anything that is a good deal. That is a good deal for new but I think I can find a used kit for more along what I want to spend. Thank you though, Jarred

 

my bud jeff is selling a procharger 9 psi kit intercooled. it only has about 100 miles on it. ill get with him on the model number but i think its a p600b. ill check and get back with ya.

 

I know it's probably out of your price range but I have a D1SC Twin-intercooled kit that I'm selling with a total of 3 pulleys(all 12 rib) and a custom one off solid intake tube that replaces the Orange flex hose. Kit is currently on the car but is coming off this week. This kit will give you between 8 and 15+ lbs/boost depending on your application.

 

I have a good used F-body LT1 powerdyne kit without the FMU. I bought it to put on my wagon but the mounting would have to be modified too much to fit. It mounts exactly where the steering box goes in my wagon.
I will take 1000.00 or will trade up or down.

stuff I need..
58MM BBK Throttle body
12 bolt for 96 Firebird

 

I have a like new P600B that has been sitting on my new 383 LT1 motor that I built several years ago but have not had the time to finish the rest of the car, so I think I might get rid of it... it has less than 2500 miles on it and the kit that I got with it includes a 3 core intercooler that I have modded to go in front of the core support sitting vertical rather than laying down with the scoop.

for pictures of my project... http://hughlett.net/MyCar.html

Email me if your interested in the blower, I have the papers on it it too, along with a 12 rib and an 8 rib setup and some extra pulleys.

 

How much are you looking to get for the kit?

 

You realize that post is over 6 years old right?