im in the process of removing an A4 tranny off a 94 z28, but im having a problem with the top bolts connecting the tranny to the motor, i cant seem to get them loose. for those who have done this before what do you recommend i do.

also does anybody have a link that will help me with the removal of the tranny i dont want to miss anything.

 

I f you pull the cross member, it will allow the tans. to drop enough that you can see and reach the bolts with a long extention.

 

good advice. let the rear of the tranny hang down, then stab at the top bolts with extensions. if your extensions keep comming apart, try some duct tape.

 

wobble head with about a 3 foot extension. Make sure after you remove the cross brace you have something supporting the tranny....Would hate to hear that you had a 4L60E land on your head...