West South Central Arkansas, Louisiana, Oklahoma, and Texas

tons of lt1 and ls1 parts for sale

Thread Tools
 
Search this Thread
 
Old 10-06-2009, 01:17 AM
  #1  
Registered User
Thread Starter
 
Daniel6718's Avatar
 
Join Date: Nov 2004
Location: Garland, tx
Posts: 2,475
tons of lt1 and ls1 parts for sale

LS1 STUFF
241 casting ls1 heads 75 each set
ls1 fuel rails 40
injectors 34 lb/hr and 60 psi (flow tested with sheet) 250
z06 cam 150
stock ls1 rockers 60
stock maf 60
flexplate 50
2000 black leather door panels perfect...250
passenger ttop 75
stock delco amp...40
stock monsoon radio....75

REARENDS/SUSPENSION
boxed bmr LCA with poly/poly bushngs 75 bux
lt1 steering rack 70 no leaks CLEAN!
ive got 4 sets of lt1 backing plates...
3 channel 40 bux each set
4 channel 55 bux each set
lt1 front brakes with spindles rotors hubs and calipers 75 bux
3.73 rear makes some whining 300
stock front springs from lt1 car 20
rear shocks 20 a pair

LT1 Parts
94 lt1 timing cover...25
95 + timing cover...30
cc306 6k miles.....210 shipped
egr valves 10
lt1 shortblock needs rebuild...150
lt1 oil pan...40
lt1 aluminum heads...200
lt1 intake manifold...65
lt1 injectors...35
lt1 6 speed flywheel...50
complete lt1 motor spun bearing needs rebuild 425

also have many interrior pieces from parting out a 1999 and 2000 z28
full power doors
camaro hatches
rear bumper
couple dashes with blown airbags
brake lines
fuel lines
gas tanks
k members
upper and lower control arms
struts
shocks
spindles
brakes
steering columns
interrior pieces
complete tan interrior/seats/plastics ect
swaybars phb's lca's


359 ci LT1 this shortblock is from Jim Moran aka "INTMD8" His car was well known for the fact that it was a very clean streetable(A/C, T56, full interior) turbo car for the power it was making. To give you an idea, with this shortblock he dynoed 890rwhp/855rwtq, ran a best of 9.68@146, and did 199mph in the standing mile.

Specs:
359ci LT1. 3.5in stroke forged Eagle crank, 6.0in Eage H-beam rods, 4.040 bore CP reverse dome pistons -23cc., Hellfire rings, Clevite H bearings, Internally balanced. Block has 3 center mains splayed 4 bolt. It was freshly rebuilt when I purchased it, including an align hone, new bearings/rings, and the crankshaft was turned .010 under.

asking $1999

1998 chev Blazer 4x4 150k miles red exterrior grey leather fully loaded heated seats...needs a few small things such as door switch(keeps inside lights on) and one speaker doesnt work
$1999


wtb/trade
ls1 6 speed /twin disk clutch
hardened pushrods ls1nstock leingth
powerglide/converter/shifter
50mm wastegate
t4 76mm or bigger turbo
eboost 2

Last edited by Daniel6718; 10-09-2009 at 08:43 AM.
Daniel6718 is offline  
Old 10-09-2009, 08:38 AM
  #2  
Registered User
Thread Starter
 
Daniel6718's Avatar
 
Join Date: Nov 2004
Location: Garland, tx
Posts: 2,475
ttttttttt
Daniel6718 is offline  
Old 10-09-2009, 08:45 AM
  #3  
Registered User
Thread Starter
 
Daniel6718's Avatar
 
Join Date: Nov 2004
Location: Garland, tx
Posts: 2,475
ttttttt
Daniel6718 is offline  
Old 10-26-2009, 10:44 AM
  #4  
Registered User
Thread Starter
 
Daniel6718's Avatar
 
Join Date: Nov 2004
Location: Garland, tx
Posts: 2,475
ttttttttttt
Daniel6718 is offline  
Old 10-26-2009, 03:16 PM
  #5  
Registered User
 
OutsiderIROC-Z's Avatar
 
Join Date: Aug 2003
Location: Middle of Kansas
Posts: 2,688
What year is the LT1 shortblock and the LT1 aluminum heads? When you say needs rebuilt, what do you mean? Is it blown up or just a lot of miles/wear, and also wondering the same thing about the condition of the heads?

Thanks in advance.
OutsiderIROC-Z is offline  
Old 10-26-2009, 07:02 PM
  #6  
Registered User
Thread Starter
 
Daniel6718's Avatar
 
Join Date: Nov 2004
Location: Garland, tx
Posts: 2,475
came rom a 95...pun 2 bearings
Daniel6718 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BIGCOWL-IMP
Parts For Sale
0
12-19-2014 06:59 AM
00WS6mike
Site Help and Suggestions
2
09-13-2002 10:37 PM
Carguy00
Site Help and Suggestions
1
08-06-2002 10:25 PM
z28projects4ever
Automotive News / Industry / Future Vehicle Discussion
9
07-16-2002 07:48 PM



Quick Reply: tons of lt1 and ls1 parts for sale



All times are GMT -5. The time now is 10:19 PM.