Gauging Interest: LE Heads, Single Plane, 9", 95 t/a roller
#1
NOW FOR SALE: LE Heads, Single Plane, 9", 95 t/a roller, FAST, twin disc, gauges
Well, I'm thinking about parting the car out. I had it running for a while and never drove it. I pulled it apart to upgrade some more and never put it back together. I have since had a kid and don't see me having any time in the near future for the car. All parts are in Round Rock Texas (just north of Austin). Feel free to make offers on anything but at this point I'm trying to gauge the interest of potential buyers. If there is enough interest, I will sell. If I don't get much interest, I will just keep everything for now. I will post pics tomorrow after work.
**I HAVE GOTTEN ENOUGH INTEREST SO I AM SELLING PARTS**
lloyd elliot heads (these were done before his stages but they flow the same as the LE2 heads). They have less then 2000 miles on them. They have k1100 springs and manley valves - SOLD
scorpoin 1.6 RR - 100
pistons/rods/crank - stock crank turned 10/20, scat i beam rods with upgraded rod bolts, probe fps pistons standard bore (balanced with neutral flywheel) - 300
block completely stock - 100
cam solid roller 250/256 .613 .644 112 lsa- 100
lifters comp cams endure x - 250
Edelbrock E efi intake with fuel rails and -8 fittings, wilson elbow, wilson 90mm throttle body w/o IAC- SOLD
6spd tranny with b&m short throw shifter - 1000
mccleod twin disk clutch needs rebuild - 300
9" rear end with 31 spline axles 4.10 gears (it worked fine for me but the locker needs to be tightened) - 1000
95 trans am hard top roller/eibach springs/billstein struts/boxed lca's/panhard rod/ raptor hood (needs minor body work and repaint) - 750
stock heads - 200
fast XFI w/lt1 wire harness (missing wideband O2 sensor) - 1200
hooker LT headers - 200
PA racing k member (black) - 250
computer for 95 6 speed/has a tune loaded for cam only - 50
phantom mechanical oil pressure gauge 2 1/16 - 30
phantom mechanical fuel pressure gauge 2 1/16 - 30
phantom a/f meter 2 1/16 - 30
phantom N2O gauge - 50
Comp Camps magnum pushrods 5/16 7.2 - 50
RealQuick turbo headers - PENDING
Feel free to email me with any questions at firetird@hotmail.com
All parts will be sold without warranty but I can guarantee my description and quality of all parts upon delivery. If you need any references, I can get with Tony Shepherd (he and I have had a few transactions in the past and we live in the same city). I have also purchased from RealQuick in the past.
**SEE MAIN THREAD HERE** https://www.camaroz28.com/forums/sho...d.php?t=695682
Thanks,
Bobby Strehler
512.745.0932
**I HAVE GOTTEN ENOUGH INTEREST SO I AM SELLING PARTS**
lloyd elliot heads (these were done before his stages but they flow the same as the LE2 heads). They have less then 2000 miles on them. They have k1100 springs and manley valves - SOLD
scorpoin 1.6 RR - 100
pistons/rods/crank - stock crank turned 10/20, scat i beam rods with upgraded rod bolts, probe fps pistons standard bore (balanced with neutral flywheel) - 300
block completely stock - 100
cam solid roller 250/256 .613 .644 112 lsa- 100
lifters comp cams endure x - 250
Edelbrock E efi intake with fuel rails and -8 fittings, wilson elbow, wilson 90mm throttle body w/o IAC- SOLD
6spd tranny with b&m short throw shifter - 1000
mccleod twin disk clutch needs rebuild - 300
9" rear end with 31 spline axles 4.10 gears (it worked fine for me but the locker needs to be tightened) - 1000
95 trans am hard top roller/eibach springs/billstein struts/boxed lca's/panhard rod/ raptor hood (needs minor body work and repaint) - 750
stock heads - 200
fast XFI w/lt1 wire harness (missing wideband O2 sensor) - 1200
hooker LT headers - 200
PA racing k member (black) - 250
computer for 95 6 speed/has a tune loaded for cam only - 50
phantom mechanical oil pressure gauge 2 1/16 - 30
phantom mechanical fuel pressure gauge 2 1/16 - 30
phantom a/f meter 2 1/16 - 30
phantom N2O gauge - 50
Comp Camps magnum pushrods 5/16 7.2 - 50
RealQuick turbo headers - PENDING
Feel free to email me with any questions at firetird@hotmail.com
All parts will be sold without warranty but I can guarantee my description and quality of all parts upon delivery. If you need any references, I can get with Tony Shepherd (he and I have had a few transactions in the past and we live in the same city). I have also purchased from RealQuick in the past.
**SEE MAIN THREAD HERE** https://www.camaroz28.com/forums/sho...d.php?t=695682
Thanks,
Bobby Strehler
512.745.0932
Last edited by firetird; 06-30-2009 at 11:18 PM.
#4
Thread
Thread Starter
Forum
Replies
Last Post
99TransAmWS6
Parts For Sale
2
02-12-2015 07:23 PM