LT4 AFR 217 heads ported by Lloyed Elliot with Crower dual springs, Manley full race valves, 3 valve angle job, comes with guide plates, new but only installed, 2.08intake 1.65ex-$2190
Flow # provided by Lloyed him self
FLOW # FOR LT4 AFR 217 HEADS
.2 136/99
.3 197/135
.4 239/167
.5 276/188
.6 296/205
.7 301/219
http://img.photobucket.com/albums/v2...leysPix129.jpg
http://img.photobucket.com/albums/v2...ysPix132-1.jpg
http://img.photobucket.com/albums/v2...ysPix131-1.jpg
http://img.photobucket.com/albums/v2...ysPix130-1.jpg
http://img.photobucket.com/albums/v2...ysPix134-1.jpg
LT4(red)actual intake thats been discountinued by GM ported by Lloyed Elliot for 58mm TB and ported for MY AFR HEADS, comes with block off plates that I made. $660
http://img.photobucket.com/albums/v2...leysPix113.jpg
http://img.photobucket.com/albums/v2...ysPix114-1.jpg
http://img.photobucket.com/albums/v2...ysPix112-1.jpg
http://img.photobucket.com/albums/v2...ysPix115-1.jpg
http://img.photobucket.com/albums/v2...leysPix119.jpg
http://img.photobucket.com/albums/v2...ysPix116-1.jpg

BBK 58mm TB new 4 hrs of dyno time-$290
http://img.photobucket.com/albums/v2...ysPix117-2.jpg
http://img.photobucket.com/albums/v2...ysPix118-1.jpg


-Comp Cam 1.6 NSA RR 7/16 studs used-$150 !!!!!!!SOLD!!!!!!
http://img.photobucket.com/albums/v2...leysPix153.jpg
http://img.photobucket.com/albums/v2...leysPix152.jpg
http://img.photobucket.com/albums/v2...leysPix151.jpg
http://img.photobucket.com/albums/v2...leysPix150.jpg


-Brand new 5004 chrome moly push rods, lengh is 7.350 $100 shipped
http://img.photobucket.com/albums/v2...leysPix147.jpg
http://img.photobucket.com/albums/v2...leysPix149.jpg

-Used Ford blue injectors 36lb. $280
http://img.photobucket.com/albums/v2...leysPix150.jpg

-Tubular upper a-arms, new never used $ 300 adjustable
http://img.photobucket.com/albums/v2...Picture007.jpg

-K&N filter with cold air kit-$105
http://img.photobucket.com/albums/v2...ysPix121-1.jpg

-LT1 radiator $100
http://img.photobucket.com/albums/v2...ysPix128-1.jpg

-safty loop $20
http://img.photobucket.com/albums/v2...leysPix124.jpg

-Monsoon Radio wOrk but, not sure if the cd works. 70shipped
http://img.photobucket.com/albums/v2...leysPix142.jpg

-Ported mas air for LT1 $80
http://img.photobucket.com/albums/v2...ysPix140-1.jpg

-2 New Bosch O2 censors $85
http://img.photobucket.com/albums/v2...leysPix138.jpg

-Hotchkis red Strut Tower Brace, used-$90
http://img.photobucket.com/albums/v2...leysPix139.jpg

-Map censor $40
http://img.photobucket.com/albums/v2...leysPix137.jpg
http://img.photobucket.com/albums/v2...leysPix135.jpg

-Motor is in excelent shape, was inspected/torn apart/and put back together by Erik of HPE
383 forged short block:
forged eagle crank 3.75
4 bolt mains
forged H-beam rods
Weiseco forged flat top pistons
moroso high flow oil pump
LT4 double roller timing chain
Billet 2 peice rear main seal
$2300

-FMS Cam- 235/245 .585in .595ex 112+4- $260

-1LE Aluminum drive shaft, used $130

-Borla 3'' catback-$400

-Comp cam R lifters, new -$150

-Canton 6 quart oil pan-$280

-March crank pulley-$40

 

you have the electric fans?

 

yes, I do

 

bought some yesterday for 15 bucks! sorry man.