forged lt1 bottom end, cheap!!!! built 4l60e cheap!!!
forged lt1 bottom end, cheap!!!! built 4l60e cheap!!!
got a lt1 motor, nodular iron crank, TRW forged flattop pistons, very expensive nitrous rings, and forged gm rods, arp rod bolts, new bearings, frezze plugs,
0 miles since rebuilt. over 2000$ invested alone, will include a new comp 306 cam and new vented opti spark with timing chain cover and hub with short block
first 700$ takes it!!!!
i have a lt1 4l60e transmission with 0 miles on it since the rebuilt,
incresed line presure, hardend internals, new servos, both new pumps
over 900 invested,
first 250$!!!
lt1 intake with lt1 fuel rail, and afpr and lt1 tb with airfoil with it 100$
call me 713 447 6658
Vince
0 miles since rebuilt. over 2000$ invested alone, will include a new comp 306 cam and new vented opti spark with timing chain cover and hub with short block
first 700$ takes it!!!!
i have a lt1 4l60e transmission with 0 miles on it since the rebuilt,
incresed line presure, hardend internals, new servos, both new pumps
over 900 invested,
first 250$!!!
lt1 intake with lt1 fuel rail, and afpr and lt1 tb with airfoil with it 100$
call me 713 447 6658
Vince
Any work done to the block to freshin it up? What bearings are in it? What rings? Block is stock bore and crank is stock stroke?
Live in houston and available to pick it up if I decide to take it
-Robert
Live in houston and available to pick it up if I decide to take it
-Robert
tranny
transmission sold,
bored over 355, 11.1 compression with stock lt1 heads
fedural mugal or what every they are called bearings
dont remmember the name of the rings, they cost 220$ made for nitrous
no freshing, just been sitting in a garage for 3 months,
thats for the good word John, nice meeting you.
Vince
bored over 355, 11.1 compression with stock lt1 heads
fedural mugal or what every they are called bearings
dont remmember the name of the rings, they cost 220$ made for nitrous
no freshing, just been sitting in a garage for 3 months,
thats for the good word John, nice meeting you.
Vince
whats up vince, this is justin i talked to you on sunday about picking up that motor, if you still have it give me a call, or if you don't have it call me. i have the cash in my hand and i need a motor by the end of the week. call me at 832-326-1367



You guys have got to see the block...it is worth way more than $700...whoever gets it is getting a STEAL!!! Thanks again.