Forged LT1 bottom end, built 4l60e, coated hooker lts, 210/224 cam, cc306, many cheap
Thread Starter
Registered User
Joined: Feb 2002
Posts: 404
From: KINGWOOD,TX,77339
Forged LT1 bottom end, built 4l60e, coated hooker lts, 210/224 cam, cc306, many cheap
355 lt1, nodular iron impala crank, polished, shoppend forged pink rods, trw forged flat top 4 valve relief and nitrous gapped rings. ARP rod bolts, all new bearings and freeze plugs,]
been sitting for 4 months, so it would need a hone job,
700$ obo
fully built 4l60e by Mangnoila transmissions, increased line presure, new clutchs, new upgraded pumps and sprag.
shifts very firm, pm for more info
350$obo
coated used hooker lts, with bungs welded in,
in good condition, with a little oil spots. 400$obo
crane cam 210/224 new in box, with install oil
fastest stock headed lt1 ran this cam (11.4s) 150$ obo
comp cam 306 new, with less than 2K on it
230/224 .544/.577 150$ obo
Crane LT4 narrow body rockers, comes with new lt4 stronger studs, just like crane golds, but made for lt1/lt4 cars 150$
lunati roller lifters, new, cost 300$ new, for high rpms, 100$
crane .600 inch lift valve springs complete kit, fits stock valve seats 60$
lt1 fuel rail with afpr 100$ obo
stock lt1 intake 40$
stock tb with air foil 40$
stock lt1 heads, assmebled, needs a spot welded, 100$
been sitting for 4 months, so it would need a hone job,
700$ obo
fully built 4l60e by Mangnoila transmissions, increased line presure, new clutchs, new upgraded pumps and sprag.
shifts very firm, pm for more info
350$obo
coated used hooker lts, with bungs welded in,
in good condition, with a little oil spots. 400$obo
crane cam 210/224 new in box, with install oil
fastest stock headed lt1 ran this cam (11.4s) 150$ obo
comp cam 306 new, with less than 2K on it
230/224 .544/.577 150$ obo
Crane LT4 narrow body rockers, comes with new lt4 stronger studs, just like crane golds, but made for lt1/lt4 cars 150$
lunati roller lifters, new, cost 300$ new, for high rpms, 100$
crane .600 inch lift valve springs complete kit, fits stock valve seats 60$
lt1 fuel rail with afpr 100$ obo
stock lt1 intake 40$
stock tb with air foil 40$
stock lt1 heads, assmebled, needs a spot welded, 100$
Registered User
Joined: Feb 2003
Posts: 1,661
From: Frisco TEXAS
I am extemely interested in the 4L60-E. What kind of convertor does it have and what kind of warranty does it have? please email me at balboalt1@yahoo.com
Thanks
Oh, and do you have reciepts of the rebuild.
Thanks
Oh, and do you have reciepts of the rebuild.
Registered User
Joined: Sep 2002
Posts: 46
From: Irving tx, 75062
i want the cc 306 have cash in hands, and intrested in the crane valve springs, and anything else you have to go with the came, email me at apr97ramair@aol.com
Registered User
Joined: Aug 2002
Posts: 1,509
From: Red Oak Texas
I'll take the heads.....
let me know how to send you the $$$ and where the welding is needed.
Lloyd Elliott
972-617-5671
NightTrain66@msn.com
let me know how to send you the $$$ and where the welding is needed.
Lloyd Elliott
972-617-5671
NightTrain66@msn.com
LMFAO!!!
