Any ideas what the fastest hydraulic LT1 in TX is and what the quarter mile time is and maybe who own's it ? Some details on the car would be good also.

 

wow hard question
depends on alot



i have a cam that will put you in the 118+ mphs with some heads

 

fast93z (tony sheperd) is running 10.07 on a hydralic roller in a 396

 

Actually 10.01 @ 132+mph. Thanks for the acknowledgement!! Not sure if I am the fastest though! I guess lets wait and see who posts up!! Thanks

Tony Shepherd

 

hey tony you mind if i ask what size is the cam your running.

 

I dont mind a bit!!

It is a custom grind from Crower.

249/252 622/622 108 lc 111 lsa

Need to have really strong springs and use an AFR rev kit with this cam.

 

all motor?

 

my friend run 131+ witha 306 cam 393 and n2o

 

Are you talking about a street driven, LT1 in a 4th gen?

I am hoping for some nines out of mine when it gets back together, but it is in a 68 Camaro, so I don't know if it will count...

But it is a hyd. roller cammed LT1!

 

Yes this is street driven which still has a/c, cruise, etc. This is a 396 LT1 hydraulic roller in a 4th gen. Runs high 10's n/a and ran a 10.01 with a 200 shot. Added a trans-brake now and took some weight off the car. Gonna spray a 300+ shot in March. Expecting some deep 9's outa this beast!!

Tony

 

whats the na MPH ???

 

124 mph n/a.....car was prepped for nitrous that day.....could have been a little better with 26" tires instead of 28" slicks for NX. I have 3:55 gears and 28" tires do not work well unless I am spraying.

 

Well heck! 396.. trans brake.. slicks..

My little old 350 on street tires can't hardly compete with that!

You running 93 octane pump gas? Cutouts or full length exhaust?

 

Lewis' 95 Firehawk would be up there, they finaly put tires and an auto in it, dont know if its been to the track as of yet though.

 

I cruise around on 93 octane. At the track I throw in some 110 octane just for safety!! I had full exhaust.....now I will have duals with turndowns.