Dyno Day in SA October 5th
Thread Starter
Registered User
Joined: Jul 2001
Posts: 663
From: San Antonio, Texas
Dyno Day in SA October 5th
Anyone up for another dyno day in SA say around October 5th? Quite a few people have been asking about it again on other boards so I figured I'd get some input on who wants in.
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
Registered User
Joined: Jun 2001
Posts: 478
From: San Antonio TX
Whats up 
I most likely will in in this one.
I should my heads & cam in, and better flowing exhaust before then
ALex
------------------
96 Z28
Polo green
Leather
Hurst 6spd short shifter
SLP clutch
4:10 gears
Aluminum driveshaft
K&N cold air induction
Flowmaster 80 series muffler
" Shakes the magic 8 ball"
" I see heads & cam in the near future!"
I most likely will in in this one.I should my heads & cam in, and better flowing exhaust before then
ALex
------------------
96 Z28
Polo green
Leather
Hurst 6spd short shifter
SLP clutch
4:10 gears
Aluminum driveshaft
K&N cold air induction
Flowmaster 80 series muffler
" Shakes the magic 8 ball"
" I see heads & cam in the near future!"
Registered User
Joined: Jan 2002
Posts: 47
From: San Antonio, TX
Want to. wont know if I can until a day or so beforehand.
------------------
2002 35th SS LE #3575, T-tops and all the LE SStuff, !CAGS, B&M Ripper, BMR STB, PHB, SFC's, and LCA's, SLP OEM Lid, SLP Y pipe, Loudmouth, FTRA.
------------------
2002 35th SS LE #3575, T-tops and all the LE SStuff, !CAGS, B&M Ripper, BMR STB, PHB, SFC's, and LCA's, SLP OEM Lid, SLP Y pipe, Loudmouth, FTRA.
Banned
Joined: Jun 2000
Posts: 409
ehhh who cares if you not tuning whats the point...and since there wideband is probly still broke
its pointless to do it in sa
you either make power or you dont
<--- just spent last weekend fixing the glowing headers
Eddie
------------------
Eddie'z Transam MODS WITHIN
<A HREF="http://www.webrats.com" TARGET=_blank>Webrats.com home of
am i a **** or not
www.webrats.com</A>
Best 1/4 ET N/A 13.3 107mph 2.2 60ft Stock Lt1 longblock
Eddie'z Transam MODS WITHIN
PCM Tuning Resource
PAYPAL!!!
49!! tickets in San Antonio and counting
AOL IM (MrFox1979)
[b]BOYCOTT SMITH CHEVROLET IN SAN ANTONIO
its pointless to do it in sa
you either make power or you dont
<--- just spent last weekend fixing the glowing headers
Eddie
------------------
Eddie'z Transam MODS WITHIN
<A HREF="http://www.webrats.com" TARGET=_blank>Webrats.com home of
am i a **** or not
www.webrats.com</A>
Best 1/4 ET N/A 13.3 107mph 2.2 60ft Stock Lt1 longblock
Eddie'z Transam MODS WITHIN
PCM Tuning Resource
PAYPAL!!!
49!! tickets in San Antonio and counting
AOL IM (MrFox1979)
[b]BOYCOTT SMITH CHEVROLET IN SAN ANTONIO
Registered User
Joined: Nov 1999
Posts: 972
From: Cibolo TX
<font face="Verdana, Arial" size="2">Originally posted by eddiezlt1:
ehhh who cares if you not tuning whats the point...and since there wideband is probly still broke
its pointless to do it in sa
you either make power or you dont
<--- just spent last weekend fixing the glowing headers
Eddie
</font>
ehhh who cares if you not tuning whats the point...and since there wideband is probly still broke
its pointless to do it in sa
you either make power or you dont
<--- just spent last weekend fixing the glowing headers
Eddie
</font>
i will be there with my new set up
looking to hit 430+ hp this time with the new setup------------------
1994 Z28 A4
383 scat 9000 series crank, eagle rods, wiseco pistons,12.5:1cr ,TCI Streetfighter,HOOKER LT's,Meziere H20 pump,LT1 Edit,95+ opti
1/4:11.89
11.64 corrected
MPH:115.23
1/8th:7.4x
60':1.77
Thread Starter
Registered User
Joined: Jul 2001
Posts: 663
From: San Antonio, Texas
I've gotten a few responses on LS1.com also so I'm calling Team Extreme tomorrow morning and setting it up for the 5th.
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
Registered User
Joined: Oct 2001
Posts: 39
From: San Antonio, TX
that sounds like fun... is it dyno and tune? i'm definitely game for that
------------------
2000 White Pontiac WS6
---aka, Disgruntled marshmallow---
Whisper lid and K&N
!FRA mod
MAC Headers
MAC ORP
Borla cat-back
Granatelli springs
BMR panhard rod
BMR subframes
Nitto 555r's
... and more suspension to come
------------------
2000 White Pontiac WS6
---aka, Disgruntled marshmallow---
Whisper lid and K&N
!FRA mod
MAC Headers
MAC ORP
Borla cat-back
Granatelli springs
BMR panhard rod
BMR subframes
Nitto 555r's
... and more suspension to come
Thread Starter
Registered User
Joined: Jul 2001
Posts: 663
From: San Antonio, Texas
It's just a straight 2 pull back to back dyno. There isn't any tuning time but it's a good baseline for future setups.
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
Thread Starter
Registered User
Joined: Jul 2001
Posts: 663
From: San Antonio, Texas
This has been confirmed with Team Extreme. We are set to roll on Saturday, October 5th at 10am. Please let me know if you need more info. Team Extreme is located at 10811 Nacodochges.
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
------------------
* 1998 Trans Am A4
* 353 RWHP / 346 Torque
* mods: G2 sway bars, KB DD subframes, Tbyrne LCAs - panhard rod - & ported MAF ends, GTP Stage II heads, TR 224/224 112LSA .561 cam, FLPs, whisper c/f lid, K&N, HAL/QA shocks, NGK TR55 plugs, MSD wires, FTRA, Hotchkis STB, Pro Dyno MTTP catback, Mecham hood and spoiler 13.2 @ 111
Registered User
Joined: May 2002
Posts: 110
From: cibolo,tx,usa
Count me in.Just got a HPP3 and 160 stat.Since I have a baseline already I think I'll install the power tuning and see if it actually works.
------------------
2000 TA:Black ext,Ebony int,A4,TCS,FTRA,Whisper Lid,Mufflex 4 inchcatback w/spintech muffler,BMR STB,SLP Bellows
------------------
2000 TA:Black ext,Ebony int,A4,TCS,FTRA,Whisper Lid,Mufflex 4 inchcatback w/spintech muffler,BMR STB,SLP Bellows
Registered User
Joined: Mar 2000
Posts: 75
From: san antonio, tx
<font face="Verdana, Arial" size="2">Originally posted by warbird51:
Count me in.Just got a HPP3 and 160 stat.Since I have a baseline already I think I'll install the power tuning and see if it actually works.
</font>
Count me in.Just got a HPP3 and 160 stat.Since I have a baseline already I think I'll install the power tuning and see if it actually works.
</font>
Registered User
Joined: Jan 2002
Posts: 4
From: San antonio
<font face="Verdana, Arial" size="2">Originally posted by eddiezlt1:
ehhh who cares if you not tuning whats the point...and since there wideband is probly still broke
its pointless to do it in sa
you either make power or you dont
<--- just spent last weekend fixing the glowing headers
Eddie
</font>
ehhh who cares if you not tuning whats the point...and since there wideband is probly still broke
its pointless to do it in sa
you either make power or you dont
<--- just spent last weekend fixing the glowing headers
Eddie
</font>
------------------
Life is short take it to the Extreme!!!
http://www.teamextremeracing.com/
Registered User
Joined: Jul 2001
Posts: 456
From: sweetpea's bedroom ;)
Hmmmmmmm.......
Yeah i'll come. $40 again? Would like to see what the 'verter puts down before my big project. And yes, i have one in store, and yes, i have the funds.
Muahahahahahahahahaha!
Scott
Yeah i'll come. $40 again? Would like to see what the 'verter puts down before my big project. And yes, i have one in store, and yes, i have the funds.
Muahahahahahahahahaha!
Scott
