Biggest Freak-in Cruise! Vernon,TX
 

YES! IT'S THAT TIME AGAIN! THE BIGGEST & BADDEST CRUISE IN TEXAS! http://web.camaross.com/bb/smile.gif You must go and see this. Last year there was over 15,000 cars, who knows how many people. It starts this Thursday. It starts kickin Friday night. Tons and Tons of street racing. Bring your fat tires. Friday there's a big concert. Then Saturday is the huge cruise. Girls, Girls, Girls. Hell ya there's beer! Then more street racing. Sunday is the car show (I think? usually too drunk too tell). Come on up! There's plenty of mustang bait to spank.

mustang & NOS = Fast http://web.camaross.com/bb/wink.gif

NOT! hehe http://web.camaross.com/bb/biggrin.gif

Who's coming?


THIS HAPPENS ONLY ONCE A YEAR. EVERY YEAR. THE WHOLE TOWN IS IN ON IT!
------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

[This message has been edited by 96TAblur (edited August 07, 2002).]

I am an idiot!

Ryan

[This message has been edited by 96-speed (edited August 07, 2002).]

[This message has been edited by 96-speed (edited August 14, 2002).]

beer and racing......damn, throw in guns and I'll be there.

How far away is that from Greenville? It is about 50 miles east of dallas.

------------------
My junkie car will
NOT break 88 MPH in the eighth.
94Z Stock Bottom End
Everything else has blown up at some point in time and replaced.
Anyone want to sell me
some good 4.10's?

Customly mass produced. http://web.camaross.com/bb/smile.gif


------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

The cops will have guns. http://web.camaross.com/bb/wink.gif Does that count? http://web.camaross.com/bb/biggrin.gif The cops are usually pretty cool during this big event.

------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

where is vernon

North Texas. Go up 287 from Wichita Falls about 50 minutes. It's well worth it Saturday, but don't plan on getting a hotel room. There all booked almost a year in advance. The big car show is Sunday. The big cruise is Saturday night. They block off several streets and everything.

Mark

------------------
Stock 96TA,M6,with K&N cold air,March pulleys,MAF descreened,polished heads,CC503,Crane 1.6 RR's,LT-4 KM,BBK 52mm TB,PCMFORLESS programming,160*,Richmond 4.10s,MAC shorty headers,!EGR,!CATS,NGK TR55 plugs,Flowmaster Exhaust, Cutout,TB Bypass,!CAGS,SPEC Stage II Kevlar,AL. Driveshaft,BFG DR's,Dyno 352.2 RWHP!

The CC503 is the XE 224/230.

After I saw it in the Summit catalog I felt like a big jerk! http://web.camaross.com/bb/redface.gif

<--- Complete moron!!


Ryan



[This message has been edited by 96-speed (edited August 14, 2002).]

I thought 50 minutes north of Wichita Falls was in Oklahoma!!

Jim

p.s. You dont ever run into Lamar Murphy (NTP) do you? Biggest rip off artist I have ever met...

pink, tell me more about this Lamar Murphy character. i've heard his name floating around a few times but I don't know much about him.

LMAO, I've been wondering the same thing for a while about his cam, but I didn't want to come out and say anything. The first time I saw it I was like 503, WTF???

Now I can sleep at night http://web.camaross.com/bb/smile.gif

<----Complete Quiet Moron http://web.camaross.com/bb/biggrin.gif http://web.camaross.com/bb/tongue.gif

Basically I contracted and paid for a motor which he "built", mysteriously it lost a .25" stroke and 34 cubic inches by the time I got it. I wouldnt have even got it except I showed up on his door step for the THIRD time and took it away. None of the brands of parts I was to get were in the motor nor was the steel even 4340 as specified in the crank/rods. Chunks of metal in the pan and lifter valley and heads, even a moth in the oil pan. Not a drop of assembly lube anywhere etc etc etc. When I contacted him about it he sent me "replacement" parts which were worse quality than what I had first got from him. The kicker was that once I did the assembly myself and was priming the motor, I discovered that this was not even a good block. It had been machined incorrectly at Merlin and the main oil galley had punched through into the water jacket. Not his fault obviously but two things come to mind, (1) he had not even prelubed or checked the oiling system (which by the way had an entire tooth missing off the drive gear) and (2) he had possession of a block that according to Bill Mitchell/World Products should have been destroyed and was not supposed to have been outside of thier control.

There, thats about it in a nutshell except for a variety of engine build issues that were discovered.