justnrt

RMS at 600 watts, peak at 1200. i have it hooked up to a 400w amp and it overheats the amp since its on full and the solo baric pushes the 400w amp to overheating and the solo baric is completely distortion free. its begging for more power. the 800w-900w would be a killer amp for this speaker. even at 400w the solo baric will make the insides of your head rattle. the box that comes with the solo baric is made where it fits down in the well with no problem. it come in a professionally made kicker box that was made for the 2005 S10L7 solo baric. this speaker sounds like 2-3 12inch subs easy. in fbodies the solo barics hit HARD. i have. speaker was used for less than a month but was never pushed anywhere near its limits. i just had it to have a nice sounding stereo. reasonable offers accepted. the speaker was 375 new and the amp 150 new, and both are in perfect condition used less than a month. when the solo baric is hooked up to 800-1000w, you can hear it comming from blocks away. this thing will not distort unless you run it above 1200w, (remember this is 1 (one) dual voice coil sub)

http://i7.photobucket.com/albums/y26...Picture001.jpg
http://i7.photobucket.com/albums/y26...Picture002.jpg