INDIANA
<font face="Verdana, Arial" size="2">Originally posted by iWANTaHOTss:
Hey Instigator...do you have that orange TA??</font>
Hey Instigator...do you have that orange TA??</font>
. sweet looking carShane, you might have heard about me. i am Derek's buddy with the (used to be) 6 speed Firebird. i think you were at Dave's shop one time when i stopped by there too
Alright, i know it's been raining off and on today, but who's gonna cruise on over to Arby's tonite? I'll be there
-Kirk
------------------
**Wanted** 4th gen F-body. good exterior condition ,LT1,6spd, preferably t-tops, under $8,000 Or a clean 3rd gen 350 TPI. offrdhummer02@aol.com
-Kirk
------------------
**Wanted** 4th gen F-body. good exterior condition ,LT1,6spd, preferably t-tops, under $8,000 Or a clean 3rd gen 350 TPI. offrdhummer02@aol.com
<font face="Verdana, Arial" size="2">Originally posted by instigator74:
thx for the info Ponyhntr.Iwent down to dynotech and dropped my car off today.
HEY tang ,there's a 94 z with t-tops for 4500
(574)732-1763,red auto
</font>
thx for the info Ponyhntr.Iwent down to dynotech and dropped my car off today.
HEY tang ,there's a 94 z with t-tops for 4500
(574)732-1763,red auto
</font>
------------------
'00 Firebird Formula WS6 (Pewter)
K&N air filter
Granatelli MAF
MTI high flow air intake (clear)
Jet Chip stage II
Flowmaster muffler
Hey Kirk, how's it going. Sounds like the Camaro car show was a blast. I'm gonna try and go next year. I went to the track friday and the car has some issues. First time at the track on this set up and my best was 12.28. The car is bogging at higher mph's through 3rd and 4th. Darren and i took it out the other night & was doing it through 2nd to 4th. We're thinking the MSD 6AL box is taking a ****. So i'm gonna try my buddies to see if that's the problem. Once i get that figured out then i'll head back to the track. Also was spinning pretty bad too. So overall it was alright but once i fix the problems i'll definetely be in the 11's. Then i'll focous on the spray!!
Later, Tony
Later, Tony
The camaro show was a blast! sucks that your box is crappin out on ya. I'll be out there on friday. Was there many F-cars out there last friday?
Good Luck
-Kirk
------------------
**Wanted** 4th gen F-body. good exterior condition ,LT1,6spd, preferably t-tops, under $8,000 Or a clean 3rd gen 350 TPI. ChirpthirdLS1@aol.com
Good Luck
-Kirk
------------------
**Wanted** 4th gen F-body. good exterior condition ,LT1,6spd, preferably t-tops, under $8,000 Or a clean 3rd gen 350 TPI. ChirpthirdLS1@aol.com
Instigator- I stopped by there yesterday and saw an orange TA sitting in the shop. I thought that was a pretty good looking car, and wondered whose it was. Then tonight I was catching up on the thread and saw that it was yours! That's pretty cool. If you havn't picked it up already, do me a favor and let them know that Josh with the red Z with black stripes referred you to them. I would really appereciate it. Phil should remember who I am. What all do you have done to your car? Mine is on jackstands as I speak ready for the tranny to go back in. I just installed a SPEC Stage III carbon clutch. Before the clutch and with a stock catback and 96 degree weather, it made 340hp on Dynotech's dyno with just a 306 cam and minor porting. How did your car turn out?
Later
Josh
96 Z28
Later
Josh
96 Z28
Thanks guys, for the good word about my car.
-Ramairfbrd,I'll shott ya some info when i get it.Ipick the car up on monday and get to see the damage.the dynoruns 155/hr with a 2 hour min.
-Josh,I'll be sure to tell them you sent me.the car has an ati 9lb supercharger and headers,52tb,flowmaster,36lb injectors,355cid,internals done to make it reliable,moser 12 bolt 4.10,torque arm.It made 400hp and 400+lb of torque.
shane
-Ramairfbrd,I'll shott ya some info when i get it.Ipick the car up on monday and get to see the damage.the dynoruns 155/hr with a 2 hour min.
-Josh,I'll be sure to tell them you sent me.the car has an ati 9lb supercharger and headers,52tb,flowmaster,36lb injectors,355cid,internals done to make it reliable,moser 12 bolt 4.10,torque arm.It made 400hp and 400+lb of torque.
shane
Where is it you guys are going to be on Friday? If it's a track, how do I get there. I might not make it this week, but next week almost for sure. Thanks
------------------
'00 Firebird Formula WS6 (Pewter)
K&N air filter
Granatelli MAF
MTI high flow air intake (clear)
Jet Chip stage II
Flowmaster muffler
------------------
'00 Firebird Formula WS6 (Pewter)
K&N air filter
Granatelli MAF
MTI high flow air intake (clear)
Jet Chip stage II
Flowmaster muffler
Instigator- sounds like you have quite the setup. The next thing on my needs list is a 12 bolt or 9 inch, along with an aluminum driveshaft. Then a Mufflex catback after that. Have you ever had your car at the track? I would probably guess in the mid 11's. Thanks in advance for letting them know that I referred you. I hope you will be pleased with their work. Talk at you later.
Josh
96 Z28
Josh
96 Z28
Osceola Dragway!!!! www.osceoladragway.com
20 bucks to run all night, as for directions, 56328 Ash Rd. Osceola, IN 46561 iz the address, so get on mapquest and get some directions!!
See ya there!
-Kirk
20 bucks to run all night, as for directions, 56328 Ash Rd. Osceola, IN 46561 iz the address, so get on mapquest and get some directions!!
See ya there!
-Kirk
You gonna head out to O.C tonite Tony?
Kirk
------------------
**Wanted** 4th gen F-body. good exterior condition ,LT1,6spd, preferably t-tops, under $8,000 Or a clean 3rd gen 350 TPI. ChirpthirdLS1@aol.com
Kirk
------------------
**Wanted** 4th gen F-body. good exterior condition ,LT1,6spd, preferably t-tops, under $8,000 Or a clean 3rd gen 350 TPI. ChirpthirdLS1@aol.com


