Ran My Car
Registered User
Joined: Mar 2001
Posts: 3,121
From: Houston
8.3 in the 1/8???? 
DAMN thats great for a 3.4L. I thought my 3.4L ran hard with a 10.7! And I have Borla and a five speed! Are you spraying or some sort of other power adder? That runs harder than some V8s! Hell my friends stock 95 TA only pulled a 9.0 in the 1/8 . You must have one hell of a built motor. But why did it fall off so hard up top? A 16.1 1/4 doesnt really match up to a 8.3 1/8. You should be pulling ATLEAST a low 14 1/4 with a 8.3 1/8. Id like to know your specs. What all do u have done to it?
DAMN thats great for a 3.4L. I thought my 3.4L ran hard with a 10.7! And I have Borla and a five speed! Are you spraying or some sort of other power adder? That runs harder than some V8s! Hell my friends stock 95 TA only pulled a 9.0 in the 1/8 . You must have one hell of a built motor. But why did it fall off so hard up top? A 16.1 1/4 doesnt really match up to a 8.3 1/8. You should be pulling ATLEAST a low 14 1/4 with a 8.3 1/8. Id like to know your specs. What all do u have done to it?
Registered User
Joined: May 2002
Posts: 805
From: san anto, tx
he was just asking if that 1/8 was good. he never said that is what he ran.
i would say thats pretty good for a 3.4. but you wont need to warm up your tires even after you get your pully and whatever else you get put on. you just need better traction if you are spinning, thats all.
i would say thats pretty good for a 3.4. but you wont need to warm up your tires even after you get your pully and whatever else you get put on. you just need better traction if you are spinning, thats all.
Registered User
Joined: Mar 2001
Posts: 3,121
From: Houston
Originally posted by 94GrayV6
That 1/8 has to be more like a 10.3. Definitely a misprint. BTW, what were your 1/8 and 1/4 trap speeds?
That 1/8 has to be more like a 10.3. Definitely a misprint. BTW, what were your 1/8 and 1/4 trap speeds?
on people and flaming them. Still a 10.3 is a really good time for a 3.4L. I want to know his mods....
and your not that far away from mustangeater who runs a 15.6 or 15.7???? Anyways, good run and i'm awaiting those mods
Thread Starter
Registered User
Joined: Sep 2002
Posts: 717
sorry.
misprint..i meant to put....8.4 in the 0-60....and my mods? they are
Moroso Cold Air Induction
bored out throttle body
PaceSetter Headers
8MM Taylor Wires
NGK Plugs
TransGo Shift Kit
Spintech Dual Exhaust
appearence mods
SS Hood
SS Rims (eagle F1 17")
SS Wing
Aqua Green
and i know if i put the stall converter i want along with the gears and the underdrive pulley..i should be in the low 15's right? cus i dont want to heat my tired cus they are expensive...ill put the salad shooters on and heat them up nicely and run again...so am i on the right path? also....in March..i should be hitting early 13's.....in my TRANS AM I MEAN..gonna get me one in march tho..have to wait. i will get pictures in about 3 weeks. not that any of you want to see them.
Moroso Cold Air Induction
bored out throttle body
PaceSetter Headers
8MM Taylor Wires
NGK Plugs
TransGo Shift Kit
Spintech Dual Exhaust
appearence mods
SS Hood
SS Rims (eagle F1 17")
SS Wing
Aqua Green
and i know if i put the stall converter i want along with the gears and the underdrive pulley..i should be in the low 15's right? cus i dont want to heat my tired cus they are expensive...ill put the salad shooters on and heat them up nicely and run again...so am i on the right path? also....in March..i should be hitting early 13's.....in my TRANS AM I MEAN..gonna get me one in march tho..have to wait. i will get pictures in about 3 weeks. not that any of you want to see them.