I was looking at the crane cams power max gring # H-272-2
the specs are:
duration @.05'' lift
in 216* .454''
out 228* .480''
With 112* of lobe seperation
I am going to get an engine from crate-engines.com (no core charge and free shiping ).
And wanted to have some thing besides a stock cam in it.
The car it is going in has a 5 speed and 3.42 rear end (3.73 will be in before next time I drive it).
I was going to use a 2.8 or 3.1 intake and with 22lb. hr. injectors (aka, 3.8 injectors).
Is that cam and engine combo to much for that 2.8 computer?
How about the injectors?
Any one used one of the cams before?